Bedienungsanleitung NAD T 787 (Seite 38 von 48) (Englisch)

493493

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

The T 787 is equipped with a data port in the rear panel where an optional

“NAD IPD Dock for iPod” (NAD IPD) can be plugged in. With the NAD IPD

linking the T 787 with your own iPod player, you can enjoy listening to your

favorite tracks and playlists as well as view applicable still image and video

playback.

You can control your iPod player using the assigned buttons in the T 787

front panel. And with the corresponding HTR 8 remote control function

keys, you can select the materials stored in your iPod for playback as well as

access many of its functions even from across the room. The optional NAD

IPD also charges your iPod player while it is connected to the T 787.

NOTES

• “NAD IPD Dock for iPod” (NAD IPD) currently has two versions - the NAD

IPD 1 and NAD IPD 2. These two NAD IPD models and later variants are

compatible with the T 787.

• NAD IPD and iPod player are not supplied with your T 787.

• iPod player functions, features and playback capabilities accessible

through T 787 may vary depending on your iPod player model.

• When using the HTR 8 to control the iPod functions, make sure that the

Device Selector is set to “AMP.”

CONNECTING THE OPTIONAL NAD IPD AND iPod PLAYER

TO THE T 787

Make sure that all the devices are unplugged before making the

connections.

1 Connect the NAD IPD’s DATA PORT to the corresponding “MP DOCK”

data port of the T 787.

2 Connect also the NAD IPD’s S-Video out and audio out to the T 787

AUDIO 5/S-VIDEO 3 input (the default iPod source allocation in the

T 787).

3 Dock your iPod player into the NAD IPD.

NAVIGATING THE IPOD PLAYER’S FUNCTIONS AND FEATURES

After linking together your iPod player, NAD IPD and the T 787, you can now

plug them IN to their applicable power sources.

1 With your T 787, iPod player and NAD IPD all at power ON state, select

SOURCE 5 (iPod) of your T 787. Your iPod player will show in its display

the NAD logo and below it “OK to disconnect.” On the other hand, the

T 787 VFD will show in the upper line “iPod Menu” and the lower line

“Playlists”. The lower line will vary depending on the current menu

selected. At the same time, the T 787 OSD will display the whole iPod

Menu selections like Playlists, Artists, Albums, Songs, Podcasts, Genres,

Composers and Audiobooks.

2 Navigate through the iPod menu selections using a combination of the

[ A/S/D/F ] buttons.

NOTES

• The iPod player’s click wheel and controls will not operate when it is

properly connected to the T 787 via the NAD docking station.

• To exit from the iPod Menu at Source 5 (iPod), press [ A ] bringing you to

“Menu Select” OSD. Follow the instructions as shown.

• Source 5 is defaulted to iPod. For Source 5 (iPod) to be changed and

allocated for other inputs, go to “iPod Setup” menu under the “Source

Setup” menu. At “iPod Setup” menu, set “Enabled” to “No” – you can now

assign Source 5 with another input or setting as desired.

CONTROL FEATURES AND SETTINGS

The following control functions and settings are selectable or enabled

using the front panel and HTR 8 remote control buttons. Since the HTR 8

will be the primary controller in most cases, we will focus on remote-

controlled operations.

Note that other NAD IPD models, like the NAD IPD 2, have their own remote

controls. The controls below also apply to the corresponding buttons of the

remote controls of such applicable NAD IPD models.

ENTER

While at iPod Menu OSD, press [ENTER] to go to “iPod Settings” and setup

the following options:

Shue: Select “Shue” to enable random playback of either “Songs” or

“Albums” lists. To turn o shue mode, select “O”.

Repeat: Select “One” for repeated playback of the current song. Select

“All” for repeated playback of your entire list under “Songs” selection.

Audiobook Speed: The playback speed of your audiobook can be

varied according to your preference. During audiobook playback,

adjust the reading speed to “Normal”, “Fast” or “Slow”.

DISP

• During playback, toggle [DISP] key of HTR 8 to show in the T 787 VFD

upper line the Song title, Artist Name and Album title.

• If there is no information available, the display will show “No Song”,

“No Artist” or “No Album” as applicable. Aside from this information, the

lower line will display the current title’s song number allocation and

time elapsed.

D/F

• During playback mode, press [ D ] to skip forward to the next song or

[ F ] to skip back to the previous song.

• For quicker scrolling up or down the list, press and hold [ D/F ].

• While at menu options or selection lists, toggle [ D/F ] to go up or

down the options or lists.

D/F,  D SKIP F 

• Press HTR 8’s [ D SKIP F ] to scroll up and down the Songs list one page

or at least 8 titles at a time.

• Press and hold [ D/F ] to quickly scroll through the song titles.

• During fast scrolling, [ D SKIP F ], the rst letter of the song is displayed

on the bottom right corner of the OSD as the title changes. This is

applicable only when there are more than 4000 song titles.

 j  PAUSE/  4  PLAY

• Press [ j ] (PAUSE) during playback to stop playback temporarily.

• Resume play by pressing [ j ] (PAUSE) again or [ 4 ] (PLAY).

7/8

• During playback or pause mode, press [7/8] once for fast forward

or backward scanning of current song.

• Resume play by pressing [j] again or [u].

OPERATION

LISTENING TO YOUR iPod PLAYER

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD T 787 Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info