Bedienungsanleitung NAD T 787 (Seite 40 von 48) (Englisch)

493493

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

The NAD HTR 8 is ready to operate the T 787 right out of the box, but it is really eight remotes in one.

Each of the 8 Device Selector keys at the top of the handset can call up a new “page” of remote control

codes to be transmitted by the remaining keys. You may “teach” codes from any infrared-remote

controlled component, regardless of brand, to any or all of these.

Obviously, the most logical system is that you teach the codes from your DVD player to the [DVD]

Device Selector “page,” your television’s codes to the [TV] “page,” and so on, but there is no required

scheme: You may load any commands to any key on any page (see “Learning Codes From Other

Remotes,” below).

The HTR 8 is already preprogrammed with a full complement of commands for the T 787 on its [AMP]

Device Selector page, and as well as with library commands to operate most NAD-brand DVD or CD

components on the corresponding Device Selector “pages.” These default commands are permanent:

Even if you teach the HTR 8 new commands to take their place, the underlying library commands

remain in place and can easily be recalled should you add an NAD component to your system later

(see “Delete Mode”, below).

Note: For use with the T 787, it should not be necessary to re-program any keys on the HTR 8 [AMP]

page. However, in order for the HTR 8 to control your specic NAD-brand components you may need

to load one or more dierent code-libraries (see “Loading Code Libraries,” below).

CONTROLLING THE T 787

The HTR 8 is divided into two main sections. Eight Device Selector keys at the top—[AMP], [DVD,]

[TV,] and so on—set the handset’s remaining keys to a “page” of commands to control a particular

component. A Device Select key determines only what component the HTR 8 will command; it does

not perform any function on the A/V Receiver. All of the remaining keys are function keys that can

“learn” control codes from virtually any infrared remote controller, allowing you to teach the codes of

your equipment, regardless of brand, to the HTR 8.

However, the HTR 8 is already preprogrammed to operate the T 787. All of the function keys on the

[AMP] Device Selector “page” perform T 787 functions. (The HTR 8 can also command many other NAD

components, from its [DVD,] [CD,] [TUNER,] and [CUSTOM] pages.)

It is important to note that certain HTR 8 keys perform dierent functions depending on the selected

Device Selector “page.” The color of the Device Selector key-labeling corresponds to the labeling of the

function keys. Most centrally, the black [AMP] Device Selector “page” corresponds to the black as well

as white input-select labeling above the numeric keys: When the HTR 8’s [AMP] Device Selector page

is active, these keys select the A/V Receiver inputs. Similarly, the purple [DVD] Device Selector “page”

corresponds to several purple labels, and so on.

OPERATION

USING THE HTR 8 REMOTE CONTROL

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 787 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 787

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info