Bedienungsanleitung NAD T748v2 (Seite 10 von 40) (Englisch)

602906

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

USING THE AVR 4 REMOTE CONTROL

The AVR 4 remote control handset handles the key functions of the T 748. The AVR 4 can also be

used to directly command other NAD products that respond to applicable common remote control

codes. This includes other NAD Stereo Receiver, Integrated Amplier and Preamplier models. It has

additional controls to remotely operate NAD CD Players, AM/FM Tuners and dedicated AM/FM/DAB

Tuners. It will operate up to a distance of 23ft (7m). Alkaline batteries are recommended for maximum

operating life. Two AA batteries should be tted in the battery compartment at the rear of the Remote

Control handset. When replacing batteries, check that they have been put in the right way round, as

indicated on the base of the battery compartment.

NOTE

The remote control handset supplied with the T 748 is of a universal NAD type, designed to operate

several NAD models. Some buttons are applicable only to specic NAD models. Contact your dealer

or NAD audio specialist for assistance.

1 ON, OFF

The AVR 4 remote has a separate ON and OFF button.

• Press ON button to switch the T 748 from Standby to operating mode. Press OFF button to

switch the T 748 to Standby mode.

2 DEVICE SELECTOR

A Device Selector button determines only what component the AVR 4 will command; it does not

perform any function on the T 748.

• Press desired Device Selector button for the applicable buttons to be directed to a “page” of

commands relevant to the selected device. Upon selecting a Device, you can now press the

corresponding AVR 4 control buttons applicable for the selected Device.

3 INPUT SELECTORS

Refer to the corresponding labels printed in the remote control faceplate and their respective

assigned buttons to make use of these functions.

• Set the DEVICE SELECTOR to “AMP” in order to gain access to these buttons.

• INPUT 1, INPUT 2 up to INPUT 5 corresponds to T 748’s Source 1, Source 2 up to Source 5. Select

FRONT to select Front Input and MP for Front Audio MP input.

4 NUMERIC KEYS

The numeric keys allow for direct input of tracks for CD players and direct channel/preset access for

tuners and receivers.

5 A/V PSET

In combination with the numeric keys, press a Preset number from 1 to 5 as referenced to A/V

Presets settings. Note that the Preset settings can be congured via the A/V Presets menu.

6 DIMMER

• Reduce or restore VFD brightness.

• Depending on the NAD model, the brightness of the front panel display will vary when you

toggle this button.

• Use with NAD T 748 and other compatible NAD Stereo Receiver, Tuner and CD Player models.

7 TEST

Initiate speaker TEST mode while at the Speaker Levels section of the Speaker Setup menu.

8 MUTE

• Temporarily mutes audio output or restores audio from mute mode.

• MUTE mode is indicated by ashing Standby LED indicator for NAD Integrated Ampliers or

“Mute” shown in the VFD of NAD Receivers.

• Adjusting the volume level via the AVR 4 or the front panel volume knob will automatically

release the mute function.

9 SURR

Select desired listening or surround mode.

IDENTIFICATION OF CONTROLS

AVR 4 REMOTE CONTROL

3, 4

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T748v2 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T748v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info