Bedienungsanleitung NAD T748v2 (Seite 17 von 40) (Englisch)

602906

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SETUP MENU

The Setup Menu allows one to customize the operation of the T 748 to the

ancillary equipment used in one’s specic AV system. Unless your system

exactly matches the factory defaults, you will need to use the setup menu

to congure the inputs of the T 748.

At Setup Menu, the following are congurable – Source Setup, Speaker

Setup, Amplier Setup, HDMI Setup, Listening Mode Setup, Display Setup,

AV Presets Setup and Auto Power Down Setup.

Follow the guidelines about “DISPLAY THE OSD” and “NAVIGATING THE OSD

AND MAKING CHANGES” to navigate through the menu options and their

sub-menu selections.

SOURCE SETUP

There are three sub-menu items under Source Setup. These are Source

Setup (Normal), Source Setup (Table ) and iPod Setup.

SOURCE SETUP (NORMAL)

The Source Setup (Normal) menu makes it possible to set, allocate or

change the following settings.

SOURCE

The T 748 is equipped with eight congurable Sources. A particular Source

can be enabled or disabled, renamed, assigned analog and digital audio

sources, video sources, A/V Presets among other settings.

These settings can be implemented through the following parameters.

NOTE

Source 5 is defaulted to iPod. Remove the default setting of Source 5 to

iPod via the following procedure

1 Go to “iPod Setup” menu under the “Source Setup” menu. At “iPod

Setup” menu, set “Enabled” to “No”.

2 Then, go back to “Source Setup” menu and select “Source Setup

(Normal).

3 Go to Source 5 and set “Enabled” to “Yes”.

Source 5 can now be congured to any desired settings.

ENABLED

One can enable/disable a Source via this option. This is particularly useful

if only few Sources are used and one directly selects the Source from the

front panel, bypassing unused sources.

Select “Yes” to enable the particular Source or “No” to disable the Source.

NAME

A new Name maybe assigned to a Source label. For example, if your BD

player is attached to “Source 1”, it is possible to rename “Source 1” to “BD”.

In order to rename the Source label, scroll to the “Name” parameter. Press

[ S ] to go to the rst character. Then, press [ D/F ] to pick through the

alphanumeric selections.

Press [ S ] to move to the next character and at the same time save the

changes done on the current character. The name can be as long as eight

characters.

The new Name will be shown in the VFD as well as on the OSD.

ANALOG AUDIO

The T 748 has ve analog audio inputs. These analog inputs - Audio 1, Audio

2, Audio 3, Audio Fr (Front) and Audio MP can be variably assigned to each

Source.

Scroll to “Analog Audio” and then press [ S ] and then [ D/F ] to select and

assign an analog audio input to the particular Source.

NOTE

An incoming digital signal present at the assigned digital input will

always take precedence over the assigned analog audio input, even if

both are present. To maintain the analog audio input for the particular

Source, select “O” at the “Digital Audio” setting of the same “Source”

menu.

GAIN

Gain adjustment allows all sources to play back at the same volume level so

you don’t need to adjust the volume every time a new source is selected. It

is generally preferable to reduce the level of the loudest source rather than

making louder the softer sources.

Scroll to “Gain”, press [ S ] and then [ D/F ] to step through the desired level

from -12dB to 12dB.

OPERATION

USING THE T 748  SETUP MENU

ENGLISHPORTUGUÊS FRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T748v2 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T748v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info