Bedienungsanleitung NAD T748v2 (Seite 18 von 40) (Englisch)

602906

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

DIGITAL AUDIO

To take advantage of the T 748’s high performance surround and digital

audio circuitry, it is advisable that its Digital Audio inputs are selected.

There are three types of Digital Audio input for the T 748. These are HDMI,

Optical and Coaxial digital inputs. A fourth option is “O” whereby no

incoming digital audio signal is selected by the particular Source.

The desired digital audio input for a particular Source can be selected by

scrolling to “Digital Audio”, press [ S ] and then [ D/F ] to step through the

desired digital input source. After nalizing the desired type of Digital Audio

input, press [ S ] and then [ D/F ] again to select the specic Digital Audio input.

The following are the sets of assignable Digital Audio input:

HDMI HDMI 1, HDMI 2, HDMI 3, HDMI 4

Optical Optical 1, Optical 2, Optical Fr

Coaxial Coaxial 1, Coaxial 2

NOTE

An incoming digital signal present at the assigned digital input will

always take precedence over the assigned analog audio input, even if

both are present. To maintain the analog audio input for the particular

Source, select “O” at the “Digital Audio” setting of the same “Source”

menu.

VIDEO

There are four types of video input a particular Source could be assigned.

These are HDMI, Comp (Component), S-Vid (S-Video) and Video inputs. A

fth option is “O” wherein the particular Source is prompted not to select

any Video input.

Navigate through the Video input selections by pressing [ S ] and then

[ D/F ] to step through the selections. The following are the sets of

assignable Video input:

HDMI HDMI 1, HDMI 2, HDMI 3, HDMI 4

Component Video Comp 1

S-Video S-Vid 1, S-Vid Fr

Video Video 1, Video 2, Video Front

VIDEO FORMAT CONVERSION

The T 748 is equipped with a Video Format Converter. This allows for a

simplied video connection between the T 748 and your TV Monitor when

using multiple video formats such as Composite (CVBS), S-Video, and

Component (YUV). This format change is accomplished by encoding the

analog video signal into a digital signal using a very high quality digital

encoder to maintain the best possible picture quality.

Once in digital format, the video input signal could also be available at

the other Monitor output jacks including HDMI MONITOR OUT. Thus, you

do not have to necessarily assign the video output of a composite video

input signal to MONITOR OUT (Composite video). The composite video

input signal can be viewed also at HDMI MONITOR OUT at a resolution

setting dependent upon your TV/Monitor’s resolution capability. Some TV/

Monitors will automatically display the video signal at 480p/576p if they are

not capable of displaying 480i/576i.

A/V PRESET

A particular Source can be assigned a stored Preset. The parameters set up

in the selected Preset number will be adopted into the particular Source it

is assigned (Please refer to the separate section on “A/V Presets Setup” for

further understanding of Preset settings).

Scrolling to “A/V Preset” and by pressing [ S ] and then [ D/F ], a Source

could be assigned a Preset number ranging from Preset 1 to 5.

If it is desired not to assign the particular Source a Preset setting, select

“None”.

SOURCE SETUP (TABLE)

The Source Setup (Table) reects the settings made in the Source Setup

(Normal) menu. All the Source settings are summarized and displayed in

tabulated form in the Source Setup (Table).

Navigating through the Source Setup (Table) via a combination of [ A/S ]

and then [ D/F ] buttons, one will have the benet of directly changing the

settings for “Audio”, “Video”, “Preset” and “Source Name” without going back

to the Source Setup (Normal) menu.

Highlight a particular Source number and then, toggle [ENTER] button to

enable or disable said Source number.

iPod SETUP

The iPod Setup menu allows you to preset the following associated settings

when iPod is the selected source.

Enabled: Select “Yes” to enable iPod as a Source or “No” to disable it.

Auto Connect: Select “Yes” to automatically enable and connect the

iPod player docked in the linked NAD iPod docking station when Source

5 (the default iPod source allocation in the T 748) is selected. Select “No”

if you do not want a docked iPod to be automatically connected.

Menu Timeout: Set the time for the OSD to revert to the “Now

Playing” display when the iPod menu has been left idle (no scrolling or

navigation being done) for the specied time out time. For the “Now

Playing” OSD to be shown, there should be a song paused or being

played before going to the iPod menu. You can set the “Menu Timeout”

between the range 5s to 60s at 5s increments. If you do not want for

the menu to timeout, select “0s”.

OPERATION

USING THE T 748  SETUP MENU

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T748v2 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T748v2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info