Bedienungsanleitung NAD VISO TWO (Seite 8 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

1 POWER BUTTON: Press this button or the HTR 6 remote’s [ON] button

to switch ON the VISO TWO. The Standby LED indicator will turn from

amber to blue and illuminate the VFD. Pressing the power button again

or HTR 6’s [OFF] button turns the unit back to standby mode.

Note that when you do choose to switch OFF to standby using the front

panel Power button, the VISO TWO’s memory back-up system will store

channel level, tuner preset, and other settings for several weeks while

the unit is switched o.

Pressing the [OPEN/CLOSE] button on the front-panel or the HTR 6

remote’s [ ] button will switch ON the VISO TWO from standby mode

and at the same time open the disc tray.

NOTE

It takes around 10 seconds for VISO TWO to switch to full standby mode

when it is powered OFF from source inputs other than DVD mode. In this

condition, it also takes around 10 seconds for the standby LED to switch

from blue to amber color.

2 STANDBY LED: This indicator will light up amber when the VISO TWO

is in standby state. When the VISO TWO is at ON state, this indicator will

illuminate blue.

3 NAVIGATION AND ENTER BUTTONS: The navigation buttons

[PRESET / ] / [TUNE / ] in conjunction with the [ENTER]

button allows one to navigate the OSD, title and menu options.

In AM/FM/XM mode, use [PRESET / ] to step up or down

between radio presets. “Unused” presets are skipped over. Note that

Presets must have been previously stored. Refer also to the item on

“SETTING RADIO PRESET” under “OPERATION - USING THE VISO TWO

– AM/FM/DB/iPod” discussions.

Pressing momentarily the [TUNE / ] button will manually scan the

AM or FM band. Press and hold for more than 2 seconds to search up or

down; the VISO TWO’s tuner will stop at the next suciently strong signal it

encounters. Note that this function, too, “wraps” and will continue searching

up or down from one end of the AM or FM band to the other.

At DVD mode, press [ ] to skip forward or [ ] to skip backward a

track, le or chapter. Press [ / ] during disc playback to select the

desired scanning speed.

4 MENU: Press this button to bring up the DVD disc menu during DVD

disc playback, stop, pause or stop-resume mode. At FM/XM/DAB mode,

the MENU button also functions the same way as that of TUNER MODE

button. See also TUNER MODE description below.

5 DISPLAY: At TUNER mode, toggle this multifunction button to display

at the VFD relevant information of a currently tuned FM, XM or DAB

station.

At CABLE/SAT, VCR or Front source mode, toggle DISPLAY button to

select optical, coaxial audio input or the assigned analog audio input of

the particular source.

When in DVD mode, toggle DISPLAY button to alternatively display the

general disc playback status of the DVD display navigation menu.

6 MEMORY: Use to store tuned stations to the VISO TWO’s preset-

memory locations. Refer also to the item on “SETTING RADIO PRESET”

under “OPERATION - USING THE VISO TWO – AM/FM/DB/iPod”

discussions.

7 REMOTE SENSOR: Point the HTR 6 remote control at the remote

sensor and press the buttons. Do not expose the remote sensor

of the VISO TWO to a strong light source such as direct sunlight or

illumination. If you do so, you may not be able to operate the VISO TWO

with the remote control.

Distance: About 23ft (7m) from the front of the remote sensor.

Angle: About 30o in each direction of the front of the remote sensor.

8 VACUUM FLUORESCENT DISPLAY (VFD): Provides visual

information about the unit’s important modes, settings, functions,

status of the current source like disc playback time and other indicators.

9 FM/AM/DB: Toggle this button to select either AM, FM, DAB (Europe

version) or XM (North America version) tuner functions.

IDENTIFICATION OF CONTROLS

FRONT PANEL

3 4 5 6 7 8 9 10 11 12 13

21 19 16 15 14

1 2

171820

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD VISO TWO Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info