Bedienungsanleitung NAD VISO TWO (Seite 16 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

VIDEO SETUP MENU

DISC VIDEO

FORMAT

Set FORMAT to select a picture size matching the aspect ratio of your

TV/Monitor.

Select “Pan Scan 4:3” or “Letter Box 4:3” when a standard 4:3 TV is connected.

Letter Box 4:3 : Displays a wide picture with bands on the upper and

lower portions of the screen.

Pan Scan 4:3 : Automatically displays the wide picture on the entire

screen and cuts o the portions that do not t.

Widescreen 16:9 : Select when a 16:9 wide TV is connected. Set the

widescreen TV to FULL mode if necessary.

NOTE

 Ifyouhavea16:9displaydeviceandyouhavedefaulted“Format”to

“Widescreen16:9”,itdoesnotmeanyouwillalwaysseemoviesinthis

format-Widescreen16:9displayformatmustbesupportedbythedisc

beingplayedinordertoviewthemovieinwidescreenformat.

SIGNAL MODE

Depending on the type of TV/Monitor set you own, select the signal mode

you wish to watch your disc. Refer to your TV/Monitor’s owner’s manual to

check its signal or system mode capabilities.

Auto : Automatically detects the signal mode of your TV/Monitor.

NTSC : Select when the signal mode of your TV/Monitor is NTSC system.

PAL : Select when the signal mode of your TV/Monitor is PAL system.

HDMI RES (RESOLUTION)

HDMI video resolution can be adjusted with the VISO TWO connected to an

HDMI-compatible component via HDMI OUT.

480P/576P, 720P, 1080I : Set applicable resolution depending on your

TV/Monitor capability.

Auto : The best resolution is automatically selected based on your

TV/monitor’s capability.

O : Select to turn o HDMI output.

NOTES

• Forsettingsotherthan“Auto”,besurethattheselectedresolution

issupportedbytheHDMI-compatiblemonitoryouareusing.Ifthe

selectedresolutionisnotsupported,thissettingisautomatically

switched to the most appropriate resolution.

• PicturequalitymaydecreasewhenanHDMIcablelongerthan5misused.

IMPORTANT NOTE ABOUT HDMI CONNECTION AND SETTING

With HDMI OUT connected to a HDMI-compatible component, component

video out, composite and S-video output will only be available when “HDMI

Res.” is set to “480P/576P” or “O”. For component video out, composite and

S-video to come up, unplug HDMI cable or undertake the following:

1 At DVD mode and with no disc loaded, “NO DISC”, press and hold

[DISPLAY] button. The lower line of the VFD will show the current HDMI

resolution setting.

2 Use the remote’s [ ] keys or toggle [MEMORY] button to select

through 480P/576P, 720P, 1080I, AUTO or OFF. Select either “480P/576P”

or “OFF” to enable component video out, composite and S-Video

output. To set preferred resolution setting, stop at your desired

resolution setting and release [ ] keys or [MEMORY] button.

BRIGHTNESS

Adjust overall brightness of the image. Set the brightness level over a

range ±7. Select “BASIC” to maintain default brightness setting.

SHARPNESS

Picture sharpness could be easily lost during the recording/playback

process. Adjust sharpness to improve the ne details of the picture. Set

the sharpness level over a range ±7. Select “BASIC” to maintain default

sharpness setting.

VIDEO OUTPUT EUROPE VERSION MODEL ONLY

Select between “Component” and “RGB” as your preferred video output

media. Make sure the appropriate video out of VISO TWO is connected to

the corresponding video input of your TV/monitor.

“RGB” video setting is preferable if your output media is through SCART

OUT. At RGB setting, video signal is split into three fundamental colors Red,

Green and Blue (RGB) resulting to greater picture resolution and elimination

of artifacts associated with traditional composite video signals.

Select “Component” if you are not using SCART OUT as your output media.

OPERATION

USING THE VISO TWO  VIDEO SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD VISO TWO Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info