Bedienungsanleitung NAD VISO TWO (Seite 29 von 34) (Englisch)

602923

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

LEARNING CODES FROM OTHER REMOTES

Begin by positioning the HTR 6 “nose-to-nose” with the source remote so

the two devices’ infrared windows are about 2 inches apart.

• Enter Learning Mode: On the HTR 6, simultaneously press-and-hold for

3 seconds both a Device Selector key and the [ ] key until the Learn

LED at the center of the HTR 6 turns steady green.

• Press the HTR 6’s function key you wish to teach a command; the Learn

LED will turn amber.

• Press-and-hold the function key on the source remote: The HTR 6’s

Learn LED will icker amber for a second or two, then turn solid green.

The command is learned.

• Press the HTR 6’s Device Selector key again to exit the learning mode.

If the Learn LED does not icker amber you may need to vary the distance

between the remotes. If the Learn LED turns red rather than green, that

particular command of that source remote command could not be learned.

CANCEL OPERATION

You can cancel conguring a key, by pressing the active Device Selector key

before the learn process is complete; the Learn LED will turn red.

Example: Learning “DVD Pause”

Position the HTR 6 and your DVD player’s remote as described above.

• On the HTR 6, simultaneously press-and-hold [DVD] and [ ]; the Learn

LED turns steady green.

• Press the HTR 6’s [ ] key; the Learn LED turns amber.

• Press-and-hold the DVD player’s remote’s pause key; the HTR 6’s Learn

LED ickers amber and then turns solid green. The command is learned.

• Press [DVD] again to exit the learning mode.

PUNCH-THROUGH

The HTR 6’s “punch-through” function allows you to retain a function key

from one Device Select “page” to another, so that, for example, the AMP

[SURR MODE] function might still control the VISO TWO when the DVD

Device Selector page is active.

NOTE

 TheHTR6’s[VOL]keysarepre-programmedas“punched-through”

forallDeviceSelectpages:[VOL]willoperatetheVISOTWO’svolume

regardlessofthecurrentlyselecteddevice.The[SUB]levelcontrolis

similarlypre-programmedaspunched-through.

To set a punch through, after entering the Learning Mode, and pressing the

desired key to be punched through, simply press the device key twice of

the device to punch through to. The status LED will turn green; press the

Device Selector key again to exit Learning Mode.

Example: Punch-through AMP [SURR MODE] key to the DVD “page”

• On the HTR 6, simultaneously press-and-hold [DVD] and [ ]; the Learn

LED turns steady green.

• Press [SURR MODE]; the Learn LED turns amber.

• Press [AMP] twice; the Learn LED turns green.

• Press [DVD] again to exit the learning mode.

NOTE

 TheHTR6controlkeys[ ],[ ],[ ],[ / / / ]and[ ]arenot

punch-throughfunctionkeys.Tousethemfordiscplaybackpurposes,make

surethatHTR6’sDEVICESELECTORissetto“DVD”.

COPY COMMAND FROM ANOTHER BUTTON

You may copy a command from any HTR 6 key to any other key. To copy a key

function, after entering the Learning Mode, and pressing the desired key to be

copied to, simply press the device key from which you wish to copy, having rst

pressed its Device Selector key if it resides on another “page.” The status LED will

turn green; press the Device Selector key again to exit Learning Mode.

Example: Copy the Pause command from the CD page to the AMP [ ]

key:

• On the HTR 6, simultaneously press-and-hold [AMP] and [ ]; the Learn

LED turns steady green.

• Press [ ] (pause); the Learn LED turns amber.

• Press [CD]; press [ ] (pause); the Learn LED turns green.

• Press [AMP] again to exit the learning mode.

NOTE

 Thecopyandpunch-throughfunctionsaresimilar.However,ifyou

copyacommandandthensubsequentlydelete,orover-writethe

original(source-key)command,thecopied-tokey’scommandremains

unchanged.Ifyoupunch-throughtoacommandandthendeleteor

over-writetheoriginalkey,thepunched-throughfunctionsalsochange

accordingly.

MACRO COMMANDS

A “macro” command is a series of two or more remote codes issued

automatically from a single keypress. You might use a macro to automate

a simple command sequence, such as, “Turn on the DVD player” and

then press “play”. Or you might compose an elaborate macro to power

up an entire system, select a source, choose a Listening Mode, and begin

playback—again, all from a single keypress. The HTR 6 can store one macro

on each of its function keys (these exclude the Device Selector keys).

NOTE

 Macrosareindependentofthecurrentlyselecteddevice.

RECORDING MACROS

To record a macro, simultaneously press-and-hold for 3 seconds both the

[MACRO] key and the HTR 6 function key to which you wish to assign the

macro, until the status LED turns green. The macro button will also light up.

Press the sequence of function keys to be recorded into the macro, being

sure to rst press the requisite Device Selector key for each function (you

may switch devices while recording the macro as many times as necessary),

allowing you to create macro containing commands from more than one

Device Selector “page.”

When you have nished entering the desired command sequence, press

[MACRO] again to store the macro; the Learn LED and [MACRO] key

illumination will turn o.

NOTE

 Eachmacrocanstoreamaximumof64commandsteps.Ifyouexceed

thisnumber,themacrowillbestoredautomaticallyafterthe64th

command is added.

Example: Record a Macro to the [0] key to Turn on the VISO TWO, Select

the DVD Input, and Commence Playback:

• On the HTR 6, simultaneously press-and-hold [MACRO] and [0] (numeric

zero); the Learn LED turns steady green.

• Press [AMP]; press [ON]; press [1] (“DVD”); press [DVD]; press [ ] (Play)

- the Learn LED blinks as each step is added.

• Press [MACRO] again to exit the macro-record mode.

To clear a macro, perform the above steps without entering any functions.

OPERATION

USING THE HTR 6 REMOTE CONTROL

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

NAD VISO TWO Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD VISO TWO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info