Bedienungsanleitung Naim HDX (Seite 7 von 32) (Englisch)

707495

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Installation - Getting Started

2.4 Switch On

If the HDX’s network facilities are to be used ensure that

it is connected to a working internet connection before

switching it on and that all the necessary peripheral

equipment is appropriately connected and configured.

Switch on the HDX using the rear panel power switch.

Note: If the HDX is to be switched on from shutdown mode,

the power switch must be switched off and on again. See

Section 2.8 for more on shutdown mode.

After approximately one minute’s delay, the user interface

Home menu will appear on the front panel touch screen

(and any connected display). Navigate around the

interface and select options by touching the screen or

using the remote handset navigation (3456), ok, home

and back keys.

Note: It is occasionally possible for the default remote handset

command set to conflict with other remote controlled

equipment in the home. A conflict will be apparent if the

handset appears to control an unintended device or if

another handset appears to control the HDX. If a conflict

occurs the HDX handset command set can be changed.

While pointing the handset towards the HDX, press and hold

both the page down and input keys while simultaneously

pressing the 2 or 3 key to change the command set. Press the

1 key to return to the default command set.

2.5 External Screen Setup

If an external display is used, the HDX external display

setup may need to be modified. Navigate, via the System

menu, to the System Settings menu. Select and save the

desired External Display Theme, External Display Aspect

Ratio, External Display Mode and TV System. Initially disable

the Screen Saver (found on System Setup page 1).

Note: The External Display Mode setting configures the

external display for use with either an external touch

screen or a remote handset. In touch screen mode, four

shortcut buttons are displayed on the right of the screen

that correspond to the home, browse, find and back keys

on the remote handset. The on screen shortcut buttons

can only be accessed from the touch screen so are not

shown in remote control mode.

Note: Once you have become used to the interface and

are familiar with its functions the screen saver can be

re-enabled.

2.6 First Use

The HDX is shipped with some music files already stored

on its hard disk. One of these can be used to check that

playback is operating correctly. Navigate via the Front

Panel Display Interface from the Home Menu to the Quick

Play menu and select Play Random to play a track.

To “rip” a CD to the HDX hard disk, use the front panel

open button to open the CD drawer. Insert a CD and

press the open button again to close the drawer. The

ripping process will begin automatically. When CD ripping

is complete the HDX will eject the CD automatically. See

Section 6 for further information on ripping CDs.

Only CDs owned personally should be ripped. Ripping a

borrowed CD may violate copyright law.

Note: Although the HDX contains a small internal music

database, to be able to identify a CD and download its

associated data during the ripping process, it must be

connected to a working internet connection.

2.7 Software Upgrade

Software upgrade CDs will occasionally be released for

the HDX. New software is installed simply by inserting the

upgrade CD in the drawer. The software upgrade process

will commence automatically. As part of the upgrade

process the HDX will eject the CD and re-boot. The front

panel display may also go blank temporarily. The upgrade

process is complete once the display returns to the Home

Menu.

Note: Any specific instructions included with the upgrade

CD should be followed carefully.

Never switch off the HDX from the rear panel power

switch or unplug it from the mains supply while a software

upgrade process is underway.

2.8 Switching Off

Switching off the HDX from its rear panel power switch

is not normally necessary unless it is to be un-installed. It

can be put into shutdown mode by pressing the handset

shutdown key or pressing and holding the front panel

shutdown button for one second. The HDX may take up

to one minute to enter shutdown mode during which time

the shutdown button will flash. The shutdown button will

remain lit when the HDX is in shutdown mode. Wait until

the shutdown button stops flashing and remains lit before

switching off the HDX from the rear panel mains switch.

Never switch off the HDX from the rear panel mains switch

or unplug it from the mains supply unless it is in shutdown

mode.

To switch the HDX back on from shutdown mode, the

power switch must be switched off and on again.

2.9 Data Backup

HDX does not incorporate an integral backup disk drive

and we strongly advise that you protect your stored music

by implementing a regular backup to a Network Attached

Storage (NAS) hard disk drive.

Implementing regular backups to a network share can

be set up via the HDX System menu. This is described in

Section 4.8.4.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim HDX Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim HDX

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info