Bedienungsanleitung Naim ND5 XS (Seite 6 von 23) (Englisch)

707490

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Installation and Connection

2.5 Mains Power Connection

Connect the NDX/5XS to a mains power socket using either

the mains cable supplied or a Naim Power-Line.

2.6 Power Supply Upgrade

The NDX/5XS can be upgraded through the use of an

external Naim power supply.

IMPORTANT: XPS POWER SUPPLIES WITH SERIAL NUMBERS

BELOW 188015 ARE NOT COMPATIBLE WITH THE NDX OR

ND5 XS AND SHOULD NOT BE USED. CONTACT YOUR LOCAL

RETAILER OR DISTRIBUTOR FOR MORE INFORMATION.

If an external power supply is to be used, the link plug on

the rear panel of the NDX/5XS should be removed and the

power supply connected in its place using an SXPS Burndy

cable. See Diagrams 2.2 and 2.4.

THE SXPS BURNDY CABLE ONLY MUST BE USED TO CONNECT

THE EXTERNAL POWER SUPPLIES.

The NDX/5XS power switch should be off and the mains

power cable removed when an external power supply is

used. The NDX/5XS is then switched on using the external

power supply power switch.

2.7 FM/DAB Aerial Connection

If the NDX/5XS FM/DAB tuner option is fitted it will only be

able to provide high quality FM and DAB radio if a strong,

interference-free radio signal is available. The NDX/5XS rear

panel FM/DAB Aerial socket must be connected, via 75

Ohm low-loss coaxial cable, to a suitable aerial. The aerial

should be mounted clear of large obstructions and as high

as possible; ideally on a roof.

Note: Your local retailer should be able to offer advice on

a suitable aerial and aerial installer.

2.8 Audio Inputs and Outputs

2.8.1 Audio Signal Inputs

NDX/5XS provides three S/PDIF digital inputs. Connection

to the inputs is made via a variety of socket types. The

following table lists the inputs and their socket types:

Input Socket

dig. 1 Coaxial (BNC)

dig. 2 Coaxial (RCA phono)

dig. 3 Optical (TosLink)

Always use high quality interconnect cables to connect

sources to NDX/5XS inputs.

The digital inputs are configured via the NDX/5XS Digital

Inputs setup menu. See Section 4.3.6.

2.8.2 Audio Signal Outputs

The NDX/5XS provides analogue and digital audio signal

outputs intended for connection to an appropriate

preamplifier or digital to analogue converter input.

NDX/5XS output connections are made via the socket

types listed below:

Output Socket

Analogue stereo 5-pin DIN

Analogue stereo RCA phono

S/PDIF digital stereo BNC Coaxial

Note: Output sockets are selected and configured via

the NDX/5XS Analogue Outputs and Digital Output setup

menus. See Sections 4.4 and 4.6.

2.9 USB Interface

The NDX/5XS is fitted with a front panel USB interface

intended for the connection of USB memory hardware

carrying audio files. The USB interface should not be used

for any other purpose.

2.10 Network Connections

The NDX/5XS can be connected to a TCP/IP network via

either a wired or wireless connection. Network connection

enables the NDX/5XS to play internet radio data streams

or play audio files stored on UPnP™ servers such as the

Naim UnitiServe and HDX, and appropriately configured

computers and network drives.

2.10.1 Wired Network Connection

The NDX/5XS is fitted on its rear panel with a standard

Ethernet socket. For wired network connection this socket

should be connected to a spare Ethernet socket on your

network router.

Note: Ethernet-over-mains hardware may be used and

provides a simple and convenient method of wired home

network connection. However, depending on mains wiring

factors specific to each home environment, the presence

of network data on the mains supply may compromise

overall system sound quality. If any sound quality

compromise is found to be unacceptable, dedicated

network cabling should be installed or wireless networking

should be employed.

2.10.2 Wireless Network Connection

If NDX/5XS is to connect wirelessly to the home network

the supplied Wi-Fi antenna must be fitted to the rear panel

wireless antenna socket. Wireless configuration will also

be necessary before NDX/5XS is able to connect to your

home network. See Section 4.5.1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim ND5 XS Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim ND5 XS

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info