Bedienungsanleitung Naim SuperUniti (Seite 21 von 36) (Englisch)

707487

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Speakers 1/3

4Amp Used: Internal Only

Max. Volume: 100

Balance: 0

Max. Volume: 0 to 100 (adjust using handset 6 or 5

keys)

Balance: -10 to + 10 (adjust using handset 6 or

5 keys)

Select the Large+Sub option when a subwoofer is

connected and used to augment the low frequency

performance of large (full bandwidth) speakers.

Select Large when no subwoofer is used (the NaimUniti 2

subwoofer output is switched o when Large is selected).

Select Small+Sub when a subwoofer is used to provide the

low frequency element of a speaker system incorporating

small (restricted bandwidth) satellite speakers. When

Small+Sub is specied, a 100Hz high-pass lter is applied to

the NaimUniti 2 speaker output signal.

Select None when no speakers are connected to the

NaimUniti 2 speaker outputs.

The speaker Max. Volume and Balance parameters specify

maximum allowed volume, and the channel balance

respectively.

UnitiLite • SuperUniti

Parameter Options

Amp Used: Internal Only

/ External / All

Outputs

Max. Volume: 0 to 100 (adjust using handset 6or 5

keys)

Balance: -10 to + 10 (adjust using handset 6or

5 keys)

Select Internal Only if no external amplier is to be used. The

preamplier output is disabled when Internal Only is selected.

Select External if an external power amplier is to be used

in place of the internal power amplier. The preamplier

output is enabled when External is selected.

Select All Outputs if an external power amplier or

subwoofer is to be used in conjunction with the internal

power amplier.

The speaker Max. Volume and Balance parameters specify

maximum allowed volume, and the channel balance

respectively.

4.6 The Headphones Menu

The Headphones setup menu

enables the Max. Volume parameter

to be selected:

Parameter Options

Max. Volume: 0 to 100 (adjust

using handset 6or 5 keys)

4.7 The Network Settings Menu

The Network Settings menu

enables network parameters to be

customised to suit the router and

network. The options are tabulated

and described in the following

sections:

Parameter Options

Name: User denable

Wireless: Not Used / Wi-Fi Network Name

Status: Connected / No Signal / Login Failure /

Busy / Etc.

DHCP: Yes / No

MAC: Displays the unit’s MAC address

The Name parameter enables the unit’s default network

name to be changed.

The Wireless parameter enables a wireless network to be

chosen and joined. See Section 4.7.1 below for detailed

wireless set up notes.

Network Status displays the current network connection

status.

The DHCP parameter enables the network settings to

be modied. In most cases, specifying Yes and leaving

the option set to DHCP will be the appropriate choice.

See Section 4.7.2 below for notes on non-DHCP network

connection.

Note: Devices installed on a network have an IP address

through which they are identied by all the other items

on the network. DHCP is a set of rules that enable the

automatic allocation of addresses as items are connected

(or switched on while connected) to the network. All Uniti

series products are congured by default to use DHCP.

Note: If a Uniti Series product is connected to a network

both wirelessly and via a wired connection, the wired

connection will take priority.

4.7.1 Wireless Network

Connection Set Up

If the Wireless parameter is selected

in the Network Settings menu the

Select Network menu will display

a list of the available networks. An option not to use a

wireless connection is also provided.

Note: Uniti Series products are compatible with the most

commonly used Wi-Fi standards. Routers that support

802.11b and 802.11g will work, however those with 802.11n

compatibility are recommended for best results.

Select Network 3/6

<Don’t Use Wireless>

LingNet

4GreenNet

 TomNet

Network Settings 1/5

4Name: Lite-0131

Wireless: Not Used

Status: Not Connected

DHCP Yes

4. Configuration

Headphones 1/1

4Max. Volume: 100

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim SuperUniti Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim SuperUniti

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info