Bedienungsanleitung Naim SuperUniti (Seite 22 von 36) (Englisch)

707487

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Note: As with any wireless network hardware, connection

reliability will be aected by both network router

performance and Wi-Fi signal quality. To minimise the

possibility of poor connection reliability, Uniti Series

products should be connected to network audio sources

by no more than one wireless “leg”. Other “legs” necessary

between a Uniti Series product and the network audio

sources should be wired.

Note: Uniti Series products cannot connect to a “hidden”

wireless network.

If the selected network is secure

and requires a password to join, an

alert message will display. Pressing

the handset ok/list key will then

open a text entry screen for entry of

the password.

Use the handset numeric/text keys

to enter the password taking care

to ensure that the letter case is

correct. Press the handset ok/list

key when text entry is complete. In

the illustration the password is “atsh”.

If the network is successfully joined

a conrmation screen will display.

If an incorrect password is entered

an alert message will display.

Note: Some routers may also

require a MAC address to be

entered before allowing Uniti

Series products to join a wireless

network. This type of security

feature is known as ‘MAC address ltering’. Uniti Series

product MAC addresses are shown in both their Network

Settings and Factory Settings menus.

Note: The wireless password key is created when the

wireless router is rst set up and could be a word or

a series of numbers and letters. If the password is not

known, check on the router settings page or with the

person who initially set up the router.

Note: If a router oers multiple security congurations,

only the most secure one will be oered.

Note: If WEP security is used the router should be set to

“auto” or “open” authentication.

If the selected network is insecure

and requires no password, an alert

message will display. Pressing the

handset ok/list key will immediately

connect your Uniti Series product to the network and

display a conrmation screen.

Note: Wireless connection diculties can sometimes be

resolved by changing the wireless connection channel in

the router settings.

4.7.2 Non-DHCP (Static)

Network Connection

If DHCP is de-selected in the

Network Settings menu, ve further

parameters will be displayed.

Parameter Options

IP: User denable (numerical entry)

Mask: User denable (numerical entry)

Gateway (Gtwy): User denable (numerical entry)

DNS1: User denable (numerical entry)

DNS2: User denable (numerical entry

These settings enable a Uniti Series product to connect

to a network using a xed IP address. On selecting each

one in turn, numerical entry screens will be displayed that

require completion with the appropriate network IP address

settings. Consult your network router’s user documentation

for help with specifying xed IP address settings.

4.8 The Front Display Menu

The Front Display setup menu

enables the behaviour of the front

panel display, logo illumination,

clock display and logo-touch muting

to be modied. The options are

tabulated and described in the following section:

Parameter Options

O During Mute: Yes / No

Auto O: Select from list

Clock When O: Yes / No

Logo O: If Muted / If Display O /Always /

Never

Logo Mute: Yes / No

Note: Logo-touch muting and illumination options are only

available on the UnitiQute 2 and SuperUniti.

When O During Mute is selected the front panel display

will switch o when mute is engaged. Auto O denes the

length of time the display will remain switched on after the

last interface operation is carried out. Periods of between 10

seconds and 1 hour can be selected.

Note: If the display has been switched o using the

handset disp key this setting will take priority over the

Auto O setting. The display will always switch on briey

when control commands are received.

Network Settings 1/5

4IP: 192.168.0.80

Mask: 255.255.255.0

Gtwy: 192.168.0.1

 DNS1: 192.168.0.1

This wireless network is

insecure and requires no

passphrase or access key.

Press OK To Connect

Front Display 1/5

4Off During Mute: No

Auto Off: 2 mins

Clock When Off: Yes

Logo Off If Muted

4. Configuration

Now enter your wireless

passphrase or access key.

Press OK to continue

flatfish abc

flatfish

Press OK to confirm

Connected

Press OK To Finish

Can’t Login

Press OK To Re-Try

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim SuperUniti Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim SuperUniti

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info