Bedienungsanleitung Naim UnitiQute 2 (Seite 14 von 22) (Englisch)

707489

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

UnitiQute 2 Setup

If an incorrect passphrase or

access key is entered UnitiQute 2

will display an alert message.

Note: As a security measure,

a router may also require the

UnitiQute 2 MAC address to be

entered before allowing it to join the wireless network. This

type of security feature is known as ‘MAC address filtering’.

The UnitiQute 2 MAC address is shown in the ‘Factory

settings > System Status’ page.

Note: The wireless passphrase/access key is created when

the wireless router is first set up and could be a word or a

series of numbers and letters. If the passphrase/access key

is not known, check on the router settings page or with the

person who initially set up the router.

Note: If a router offers multiple security configurations,

UnitiQute 2 will automatically offer only the most

secure one.

Note: If WEP security is used the router should be set

to “auto” or “open” authentication.

If the selected network is insecure

and requires no passphrase or

access key to join, UnitiQute 2 will

display an alert message. Pressing

the handset ok/list key will

immediately connect UnitiQute

2 to the network and display a

confirmation screen.

Note: Wireless connection difficulties can sometimes be

resolved by changing the wireless connection channel in

the router settings.

4.6.2 Non-DHCP (Static) Network

Connection

If DHCP is de-selected in the

Network Settings menu, five

further parameters will be

displayed.

Parameter Options

IP: User definable (numerical entry)

Default: 192.168.0.80

Mask: User definable (numerical entry)

Default: 255.255.255.0

Gateway (Gtwy): User definable (numerical entry)

Default: 192.168.0.1

DNS1: User definable (numerical entry)

Default: 192.168.0.1

DNS2: User definable (numerical entry)

Default: 192.168.0.1

These settings enable UnitiQute 2 to connect to a network

using a fixed IP address. On selecting each one in turn,

numerical entry screens will be displayed that require

completion with the appropriate network IP address

settings. Consult your network router’s user documentation

for help with specifying fixed IP address settings.

4.7 The Digital Output Menu

The Digital Output setup menu

enables the UnitiQute 2 digital

output to be switched on and its

signal format configured.

Parameter Options

Enabled: Yes / No

Output: Native / 96kHz 24bit

If Native is selected, the digital output

format will reflect the input format. If

96kHz 24bit is selected, the output is

re-sampled to 96kHz and 24bit resolution.

4.8 The Front Display Menu

The Front Display setup menu

enables the behaviour of

the front panel display, logo

illumination, clock display

and logo touch-muting to

be modified. The options are

tabulated and described in the following section:

Parameter Options

Off During Mute: Yes / No

Auto Off: Select time from list

Clock When Off: Yes / No

Logo Off: If Muted / If Display Off / Always / Never

Logo Mute: Yes / No

When Off During Mute is selected the front panel display

will switch off when mute is engaged. Auto Off defines the

length of time the display will remain switched on after

the last interface operation is carried out. Time periods of

between 10 seconds and 1 hour can be selected.

Note: If the display has been switched off using the

handset disp key this setting will take priority over the Auto

Off setting. The display will always switch on briefly when

control commands are received.

The Clock When Off settings enables the clock to remain

displayed when other display settings are switched off.

Note: If Clock When Off is set to “Yes” and Logo Off is set

to “If Muted”, the clock display will dim automatically 10

seconds after mute is selected.

The Logo Off settings select the circumstances in which

the front panel logo illumination will switch off. Logo Mute

settings engage or disengage the touch-mute function of

the front panel logo.

Digital Output 1/2

4Enabled: No

Output: Native

Front Display 1/5

4Off During Mute: No

Auto Off: 2 mins

Clock When Off: Yes

Logo Off: If Muted

Network Settings 1/5

4IP: 192.168.0.80

Mask: 255.255.255.0

Gtwy: 192.168.0.1

 DNS1: 192.168.0.1

This wireless network is

insecure and requires no

passphrase or access key.

Press OK To Connect

Can’t Login

Press OK To Re-Try

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Naim UnitiQute 2 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Naim UnitiQute 2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info