Bedienungsanleitung Navman FISH 4200 (Seite 7 von 32) (Englisch)

470014

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

7FISH 4200 Installation and Operation Manual

NAVMAN

An internal simulator allows users to learn how to

operate the fishfinder off the water.

In Simulation mode the word “SIMULATION” flashes

on the bottom of the screen. The fishfinder generates

data so that all the main screens appear to be

operational. Any changes made to the contrast,

backlighting, alarms or the display setup are saved.

NAVIGATE screen (see section 3-6)

Prominently displays the water depth as a digital

readout. The corresponding bottom trace is also

shown. These two complimentary features are

particularly useful for understanding depth trends

when travelling at speed.

It also displays the boat speed and the enabled

alarms.

DATA screen (see section 3-7)

The DATA screen displays the water temperature

and water temperature history over the last 40

minutes. It also displays the boat battery voltage, log,

engine-hours counter, boat speed, water depth and

enabled alarms.

FUEL screen (requires optional fuel kit)

(see section 3-8)

The FUEL screen displays the amount of fuel used

and fuel remaining, and the rate of fuel flow. It also

shows the boat speed, water depth and an

ECONOMY reading, which is the distance travelled

per unit of fuel used. The NAVMAN fishfinder

calculates this from the boat speed and fuel used.

The bigger the number, the better the fuel economy.

Adjust the throttle and trim to achieve the best fuel

economy.

SETUP menu (see section 4)

Use this option to customise the FISH 4200 to suit

the boat and individual preferences.

RANGE menu (see section 3-9)

Use this option to select either Auto or Manual Range

and to change the selected depth range.

HISTORY screen (see section 3-1)

Displays the echoes received over time, with the most

recent events on the right of the screen. Use this

screen when travelling to show the bottom so reefs,

wrecks and fish can be found.

ZOOM screen (see section 3-2)

This screen is split into two parts. On the right is the

Full Range Section which shows part of the

HISTORY Screen and to the left is the Zoom Section.

Use this screen for taking a closer look at interesting

underwater features.

SONAR screen (see section 3-3)

Displays the strength and depth of the echoes

returned from each ultrasonic pulse. The depth range

is displayed in the lower right corner. This screen is

a powerful aid, ideal for showing the bottom hardness

and the fish species.

This screen can also be used to adjust the display

shading on the HISTORY and ZOOM screens.

3 Operation

2-1 Simulation Mode

To turn the Simulation mode on, power the FISH 4200

off, disconnect the blue transducer plug at the rear

of unit, then turn the power on.

To turn the Simulation mode off, power the fishfinder

off, reconnect the blue transducer plug at the rear of

the unit, then power the fishfinder on.

MAIN MENU screen

The FISH 4200 is menu driven. Press to

display the MAIN MENU screen.

Press

to highlight

an option, then press

to select it.

The MAIN MENU options

are summarized below

and fully explained in the

following sections.

Enabled Alarms

(displayed on all screens)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman FISH 4200 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info