Bedienungsanleitung Navman M-Nav 950 (Seite 15 von 19) (Englisch)

663843

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

4. Select Send. The message is stored in your Sent mes-

sages list.

Sending a Form

You can send a Form as a new message or a reply to a received

message. The forms available in your M-Nav 900/950 are set up

by your fleet administrator.

NOTE

This section assumes the reply Form is already displayed.

1. Complete all the fields included in the form. Some fields

may be greyed out if the information is entered auto-

matically.

When you have completed all fields, select to send

the form. Your reply is stored in the "Sent" list, or it may

be deleted automatically after you send it, if this feature

has been enabled by your fleet administrator.

Viewing a Sent Message

1. From the main menu, select Messages.

2. Select the Sent tab. The screen displays all your replies

with the most recent one at the top of the list.

3. Select a reply to display the message, when it was

received, and any replies that have been sent.

Creating a New Message

You can create a new message from the Messages screen.

1. From the main menu, select Messages.

Select to create a new message.

3. Select Free Text. The Free text onscreen keyboard is dis-

played.

4. Enter your message and select Send. The message is

stored in your Sent messages list.

NOTE

If you have cellular coverage, the message will be sent imme-

diately. If you are out of coverage, the message will be stored

and sent when cellular coverage is re-established.

Showing a Route To Location

When you receive a message that includes an address, you have

the option to show the location on the map.

1. Open the message or form containing the address (see

Reading a Received Message on page 11).

M-Nav 900/950 | User Guide

Select Show to exit from the Route To message and

display the map. The location specified in the message is

pinpointed on the map.

3. Select Go! to start navigation.

Navigating to a Route To Location

When you receive a message that includes an address, you can

directly start the navigation to the location.

1. Open the message or form containing the address (see

Reading a Received Message on page 11).

Select Go to exit from the message and navigate to

the location. The M-Nav 900/950 displays the new route

and starts the navigation.

Deleting a Message

You can delete an existing message from your inbox at any time.

1. From the main menu, select Messages.

2. Open the message you want to delete, and select Delete

. A confirmation message appears.

3. Select OK.

EMS (Engine Monitoring System)

EMS allows you to display specific engine information. Alerts for

speed, RPM, temperature, fuel and oil pressure will be displayed

if these exceed the limits pre-set by your fleet administrator.

You can:

l continuously display multiple engine parameters while

driving (instead of viewing the navigation screen)

l view a report at the end of a trip to see engine mon-

itoring statistics.

NOTE

EMS must be set up by your fleet administrator, and the DCU

(Data Collection Unit) must be installed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman M-Nav 950 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info