Bedienungsanleitung Navman Trackfish 6600 (Seite 19 von 83) (Englisch)

512557

Zoom out

Zoom in

Vorherige Seite

1/83

Nächste Seite

TRACKFISH 6600 Installation and Operation Manual20

NAVMAN

3-2-2 Latitude and longitude

Latitude and longitude can be displayed in the

data header. Normally the position is the boat’s

position, and the latitude and longitude has a

boat symbol to show this:

If the cursor has been moved in the last ten

seconds, then the position is the cursor’s

position, and the latitude and longitude has a

cursor symbol to show this:

Warning: When reading the boat

position, make sure the position is not the

cursor position.

3-2-3 Chart scale

Press to zoom in and display a smaller area

of the chart in more detail. Press

to zoom

out and display a bigger area in less detail.

The chart scale can be displayed (e.g. scale

= 8 nm, see below). The scale is the vertical

distance across the currently visible chart area.

For example if the scale is 8 nm then a portion

of chart eight nautical miles high is currently

displayed.

3-2-4 Chart symbols and

information

The chart will show symbols, such as

waypoints and chart symbols (for example

buoys, beacons, wrecks and marinas). When

the cursor is placed over a symbol for at least

two seconds, a data window appears at the

bottom left of the display with information about

the symbol.

To see stored information about a point on the

chart (for example, a chart symbol):

1 Move the cursor to that point on the chart.

2 Press MENU and select Chart info.

3 A menu of objects is displayed:

i Select an object to display.

ii Press ESC to return to the menu.

Select other objects.

iii Finally, press ESC to return to the chart.

3-2-5 Find nearby places

To ﬁ nd and display nearby places of interest:

1 To see places near the boat’s position,

press ESC to switch to centre on boat

mode. To see places near a different

point, move the cursor to that point on

the chart.

2 Press MENU and select Find.

3 Select the type of place. There are three

types, Ports, Port services and Tide

stations. For a Port service, select the

type of service to ﬁ nd.

4 A list of places is displayed. If there are

more places than will ﬁ t on the display,

press

to scroll up or down a

page at a time.

To search for a port by name:

i Press MENU and select Find.

ii Enter some or all of the letters of the

port name. Press ENTER.

5 Select the place and press ENTER.

The chart display changes to show

the selected place in the middle of the

display.

6 To see stored information about the

selected place, press MENU and select

Chart info (see section 3-2-5). To

display a tide chart for a selected tide

station, select Tide height from the

chart info.

Minutes, to 3 decimal places

(about 2 m (6 ft) resolution)

Degrees

36° 29.637' S

175° 09.165' E

Latitude

Longitude

+ 36° 29.684' S

+ 175° 09.201' E

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Navman Trackfish 6600 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Navman Trackfish 6600

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info