Bedienungsanleitung Nec GT 5000 (Seite 11 von 115) (Englisch)

493541

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

1-7

3D REFORM

3D A

SELECT

LENS SHIFT

FOCUS ZOOM

DOWN

LEFT RIGHT

STATUSPC CARD 2PC CARD 1 LAMP 1 LAMP 2 POWER

ON/STAND BY

AUTO ADJUST

2354

61314 118912

Top Features

1. POWER Button (ON / STAND BY)( )

Use this button to turn the power on and off when the main

power is supplied and the projector is in standby mode or idle

mode.

NOTE: To turn on or off the projector, press and hold this button for a minimum

of two seconds.

2. POWER Indicator

When this indicator is green, the projector is on; when this

indicator is orange, it is in standby or idle mode. See the Power

Indicator section on page 10-3 for more details.

3. STATUS Indicator

If this light blinks red rapidly, it indicates that an error has oc-

curred, the lamp cover is not attached properly or the projector

has overheated. If this light remains orange, it indicates that

you have pressed a cabinet key while the Control Panel Key

Lock is enabled. See the Status Indicator section on page 10-

3 for more details.

4. LAMP Indicator 1/2

If this light blinks red rapidly, it's warning you that the lamp has

reached the end of its usable life. After this light appears, re-

place the lamp as soon as possible (See page 9-2). See the

Lamp Indicator section on page 10-3 for more details.

5. PC CARD Access Indicator 1/2

Lights while accessing a PC card.

6. 3D REFORM Button

Press this button to enter 3D Reform mode to correct the key-

stone (trapezoidal) distortion, and make the image square.

Press to toggle between Cornerstone and Keystone adjust-

ment mode.

NOTE: Pressing and holding this button for a minimum of 2 seconds will reset

3D Reform correction setting values to zero.

7. AUTO ADJUST Button

Use this button to adjust Position-H/V and Pixel Clock/Phase

for an optimal picture. See page 3-6.

8. MENU Button

Displays the menu.

9. SELECT ̆̄̇̈ (+) (–) / Volume Buttons

̆̄ : Use these buttons to select the menu of the item you

wish to adjust. When no menus appear, these buttons

work as a volume control.

̇̈ : Use these buttons to change the level of a selected menu

item. A press of the ̈ button executes the selection. When

the menus or the Viewer tool bar is not displayed, these

buttons can be used to select a slide, or to move the

cursor in Folder List or Slide List.

10. ENTER Button

Executes your menu selection and activates items selected

from the menu.

11. CANCEL Button

Press this button to exit "Menus". Press this button to return

the adjustments to the last condition while you are in the ad-

justment or setting menu.

12. LENS SHIFT ̆̄̇̈ Button

Adjust the lens offset by shifting the projected image position

horizontally and / or vertically.

13. ZOOM Button (+/-)

Zoom the lens in and out.

14. FOCUS Button (+/-)

Adjust the lens focus.

1. Introduction

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec GT 5000 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec GT 5000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info