Bedienungsanleitung Nec gt6000 (Seite 89 von 115) (Englisch)

216054

Zoom out

Zoom in

Vorherige Seite

1/115

Nächste Seite

8-20

Advanced

IP Address

An IP address can be automatically assigned to this projector

by your DHCP server. If your network does not automatically

assign IP address, ask your network administrator for an ad-

dress, and then register it manually.

Automatic .... Automatically assigns an IP address to the pro-

jector from a DHCP server.

Manual ........ Provides a space for you to register the IP ad-

dress or subnet mask number obtained from your

network administrator.

IP Address ... Set your IP address. Press ̄ to display the soft-

ware keyboard and type in 12 numeric charac-

ters.

Subnet Mask Set your subnet mask number. Press ̄ to dis-

play the software keyboard and type in 12 nu-

meric characters.

Gateway ...... Set the default gateway of the network connected

to the projector. Press ̄ to display the software

keyboard and type in 12 numeric characters.

Checking this box will make the set default route

valid.

When data is sent from the LAN card, the trans-

fer location will be searched according to the pre-

viously set routing information; however, when

the transfer location has not been found as a re-

sult of the search, the data will be sent to the

device that holds the IP address set here. The IP

address that is set here must be one that can be

identified by a search of the routing information.

DNS Configuration

.................... Type in the IP address of the DNS server on the

network connected to the projector.

12 numeric characters are used.

Domain Name

.................... Type in domain name of the network connected

to the projector. Up to 60 alphanumeric charac-

ters can be used.

Network Type (required for wireless only)

Mode:

Select communication method when using wireless LAN.

Infrastructure

.................... Select this option when communicating with one

or more equipment connected to the wireless or

wired LAN network via an access point.

802.11 Ad Hoc

.................... Select this option when using the wireless LAN

to communicate with a computer in a one-to-one

correspondence. This is a method that meets the

IEEE802.11 wireless standard.

Ad Hoc ........Select this option when using the wireless LAN

to communicate with a computer in a one-to-one

correspondence.

Easy Connection

.................... This allows you to easily set up wireless LAN

connection. See the Software Utility Installation

section for more information.

See chapter 6 “Using the Projector in a Network”.

SSID (Network name):

Enter an identifier (SSID) for wireless LAN. Communication

can be done only with equipment whose SSID matches SSID

for your wireless LAN. Up to 32 alphanumeric characters can

be used (Case sensitive).

NOTE: To disable SSID, select a space (null) or "ANY"(All caps).

Channel:

Set this option when selecting [802.11 Ad Hoc] or [Ad Hoc] in

[Mode].

Select a channel number from the pull-down list. The channel

must match for all wireless devices communicating on your

wireless LAN.

NOTE: Channels in the pull-down list are different depending on which country you

live in.

TX rate:

Select a wireless transmission speed. Normally leave it as Au-

tomatic.

Tr y another transmission speed when the connection fails.

8. Using On-Screen Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec gt6000 Seite 89

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec gt6000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info