Bedienungsanleitung Nec LT75Z (Seite 29 von 40) (Englisch)

653980

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

E-29

Position/Clock

Horizontal

Vertical

Clock

Phase

100

800

This allows you to manually adjust the image horizontally

and vertically, and adjust Clock and Phase.

[Horizontal/Vertical Position]

Adjusts the image location horizontally and vertically using

the

䊴

and

䊳

buttons.

This adjustment is made automatically when the Auto Ad-

just is turned on.

[Clock]

Use this item with the “Auto Adjust off” to fine tune the com-

puter image or to remove any vertical banding that might

appear. This function adjusts the clock frequencies that elimi-

nate the horizontal banding in the image. Press the

䊴

and

䊳

buttons until the banding disappears. This adjustment

may be necessary when you connect your computer for

the first time. This adjustment is made automatically when

the Auto Adjust is turned on.

[Phase]

Use this item to adjust the clock phase or to reduce video

noise, dot interference or cross talk. (This is evident when

part of your image appears to be shimmering.) Use the

䊴

and

䊳

buttons to adjust the image.

Use “Phase” only after the “Clock” is complete.

This adjustment is made automatically when the Auto Ad-

just is turned on.

See “Auto Adjust” on page E-32 for turning on or off the

Auto Adjust feature.

Resolution (when Auto Adjust is off):

Video Filter (when Auto Adjust is off):Position/ Clock (when Auto Adjust is off):

This allows you to activate or deactivate the Advanced

AccuBlend feature.

Auto ............. Turns on the Advanced AccuBlend feature. The pro-

jector automatically reduces or enlarges the current

image to fit the full screen.

Native ........... Turns off the Advanced AccuBlend feature. The pro-

jector displays the current image in its true resolu-

tion.

See “Auto Adjust” on page E-32 for turning on or

off the Auto Adjust feature.

NOTE: When an image with a resolution of SVGA, XGA, SXGA or UXGA

is displayed, the Resolution is not available.

NOTE: Once the Resolution setting has been changed, the “Aspect”

setting is automatically changed to “Normal”.

Changes all adjustments and settings to the factory preset.

[All Data]

Reset all the adjustments and settings for all the signals

to the factory preset.

The items can be reset except Language, Communication

Speed, Remaining Lamp Time, Lamp Hour Meter and Pro-

jector Usage. To reset the lamp usage time, see “Clear Lamp

Hour Meter” page E-33.

This function reduces video noise.

On ................ The low-pass filter is applied.

Off ................ The low-pass filter is not applied.

Screen adjustments are possible even when the filter is on.

Factory Default

[Current Signal]

Resets the adjustments for the current signal to the factory

preset levels.

The items that can be reset are: Brightness, Contrast, Color,

Hue, Sharpness, Volume, Aspect, Horizontal Position, Ver-

tical Position, Clock, Phase, Resolution, Video Filter,

Gamma Correction, and White Balance.

Resolution

Auto Native

Factry Default

All Data

Current Signal

Video Filter

On Off

All Data Reset

Are you sure ?

Yes

Current Signal Reset

Are you sure ?

Yes

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT75Z Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT75Z

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info