Bedienungsanleitung Nec LT75Z (Seite 31 von 40) (Englisch)

653980

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

E-31

Setup

Page1 Page2 Page3 Page4

RGB

Video

S-Video

Auto

Signal Select

Signal Select:

[RGB]

Allows you to choose "RGB" for an RGB source such as a

computer, or "Component" for a component video source

such as a DVD player. Normally select "Auto" and the pro-

jector automatically detects a component signal. However

there may be some component signals that the projector is

unable to detect. If this is the case, select "Component".

Select “Scart ” for the European Scart.

[Video & S-Video System Select]

This feature enables you to select composite video stan-

dards manually. Normally select "Auto".

When you select the video standard for Video and S-Video,

select the video standard from the pull-down menu.

This must be done for Video and S-Video respectively.

Setup

Page1 Page2 Page3 Page4

Orientation Desktop Front

Top

Cinema Position

Logo

Background

[Page2] (Advanced mode)

Auto

NTSC 3.58

NTSC 4.43

PAL

PAL-M

PAL-N

PAL 60

SECAM

Setup

Enables you to set operating options.

[Page1]

[Orientation]

This reorients your image for your type of projection.

The options are: desktop front projection, ceiling rear pro-

jection, desktop rear projection, and ceiling front projec-

tion.

[Cinema Position]

This feature selects the vertical position of the image when

viewing video with Cinema aspect ratio selected.

When Cinema aspect ratio is selected on earlier models,

the image is displayed with black borders on the top and

bottom. You can select the vertical position among three

options:

Top ............... Image position is at the top with a black border on

bottom.

Center .......... Image position is at the center with black borders

on top and bottom.

Bottom ......... Image position is at the bottom with a black border

on top.

[Background]

Use this feature to display a black/ blue screen or logo when

no signal is available.

[Keystone Bar]

This option is avaiable on the optional presentaion remote

control (PR51KIT) only. This option turns on or off the key-

stone bar when you adjust the keystone using KEYSTONE

+/- button on the optional presentation remote control.

On ................ You can increase or decrease the level with the key-

stone bar on screen.

Off ................ You can increase or decrease the level without hav-

ing to use the keystone bar.

[Menu Display Time]

This option allows you to select how long the projector waits

after the last touch of a button to turn off the menu.

The preset choices are "Manual", "Auto 5 sec", "Auto 15

sec", and "Auto 45 sec". The "Auto 45 sec" is the factory

preset.

Manual ......... The menu can be turned off manually.

Auto 5 sec .... The menu will automatically be turned off in 5 sec-

onds if no buttons are pressed within 5 seconds.

Auto 15 sec .. The menu will automatically be turned off in 15 sec-

onds if no buttons are pressed within 15 seconds.

Auto 45 sec .. The menu will automatically be turned off in 45 sec-

onds if no buttons are pressed within 45 seconds.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT75Z Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT75Z

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info