Bedienungsanleitung Nec LT75Z (Seite 32 von 40) (Englisch)

653980

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

E-32

[Page 4] (Advanced mode)

Setup

Page1 Page2 Page3 Page4

Default Source Select

Communication Speed

Select

19200bps

Control Panel Key Lock

Clear Lamp Hour Meter

Default Source RGB

Unlocked

[Page 3] (Advanced mode)

Setup

Page1 Page2 Page3 Page4

Auto Adjust

Auto Start

Power Management

Keystone Save

White Segment

On Off

Power Off Confirmation On Off

On Off

[Auto Adjust]

When “Auto Adjust” is set to “On”, the projector automati-

cally determines the best resolution for the current RGB

input signal to project an image using NEC’s Advanced

AccuBlend Intelligent Pixel Blending Technology.

The image can be automatically adjusted for geometry and

stability; “Horizontal Position”, “Vertical Position”, “Clock” and

“Phase”.

On ................ Automatically adjusts image “Horizontal Position”,

“Vertical Position”, “Clock” and “Phase”.

Off ................ User can adjust the image display functions (“Hori-

zontal Position”, “Vertical Position”, “Clock” and

“Phase”) manually.

[Auto Start]

Tur ns the projector on automatically when the power cable

is inserted into an active power outlet and the main power

switch is on. This eliminates the need to always use the

“Power” button on the remote control or projector cabinet.

[Power Management]

When this option is on and there is no RGB input for five

minutes or more, the projector will automatically turn itself

off.

NOTE: This feature does not work with Video or S-Video sources.

[Power Off Confirmation]

This option determines whether a confirmation dialog for

turning off the projector will appear or not.

[Keystone Save]

This option enables you to save your current keystone set-

tings. Saving your change once affects all sources. The

changes are saved when the projector is off.

[White Segment]

You can put emphasis on either brightness or color for a

projected image.

If you prefer putting emphasis on brightness, place a

checkmark in the box to turn the option on. If you prefer an

image in truer color, turn off this option.

[Default Source Select]

You can set the projector to default to any one of its inputs

each time the projector is turned on.

Last .............. Sets the projector to default to the previous or last

active input each time the projector is turned on.

Auto ............. Searches for an active source in order of RGB →

Video → S-Video and displays the first found source.

Select ........... Displays the selected source input every time the

projector is started up. Select an input from the pull-

down menu.

[Communication Speed]

This feature sets the baud rate of the PC Control port (Mini

DIN 8 Pin).

it supports data rates from 4800 to 19200 bps.

The default is 19200 bps. Select the appropriate baud rate

for your equipment to be connected.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec LT75Z Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec LT75Z

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info