Bedienungsanleitung Nec mt 860 (Seite 51 von 65) (Englisch)

214296

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

E-51

Enable/Disable .............. This turns the Security function on or off.

Keyword ........................ Enter an appropriate keyword when you use

the Security function.

(Up to 10 characters can be used.)

The Security function is available only when

your keyword is entered.

Use Protect key ............ Check this box to lock your projector when

using a PC card. To use a keyword without

a PC card, do not check this box.

Drive ............................. Switches between PC Card slot 1 and 2.

Read ............................. Reads data of a PC card.

The Security function is not available unless

at least one PC card is registered. (if the

“Use Protect key” check box is selected)

Up to 5 PC cards can be registered.

Delete ........................... Deletes data of a registered PC card.

To set up a keyword to enable the Security function without using

a registered PC card.

1. Use the SELECT

̆̄

button to select “Keyword” and use the soft-

ware keyboard to enter a keyword.

NOTE: Please make a note of your keyword.

2. Use the SELECT

̆̄

button to select “Enable” and use the SELECT

̆̄

button to select “OK”, then the Security function will be enabled.

An “Are you sure?” message will appear. Use the SELECT

̇̈

but-

ton and press the ENTER button.

The Security function takes effect.

To register a PC card as a protect key.

1. Insert a PC card into the PC card slot of the projector.

2. Use the SELECT

̆̄

button to select "Read" and press the ENTER

button.

Data of the PC card will be read into the projector.

3. Use the SELECT

̆̄

button to select "Register" and press the EN-

TER button.

Downloaded data will be registered and be displayed in the list win-

dow.

Security

The Security function enables you to protect your projector so that the

projector will not project a signal unless you enter a keyword. There is

also an option to lock the projector by using a registered PC card as a

protect key. Once you have registered your PC card as a protect key,

you are required to insert the registered PC card into the PC card slot of

the projector each time you turn on the projector. You can enable the

Security function by using a keyword only.

4. Use the SELECT

̆̄

button to select "Keyword" and use the soft-

ware keyboard to enter a keyword.

NOTE: To use a PC card as a protect key, you must also set up a keyword.

Please make a note of your keyword.

This completes registration of your PC card.

To enable Security, use the SELECT ̆̄ button to select "Enable" and

use the SELECT ̆̄ button to select "OK" and "Security function will

be enabled. An “Are you sure?" message will appear. Use the SELECT

̇̈ button and press the ENTER button.

The Security function takes effect.

To turn on the projector when Security is enabled (when using your

keyword only).

1. Press and hold the POWER button for a minimum of two seconds.

The projector will be turned on and display a message to the effect

that the projector is security-protected.

2. Select [Projector Options]

→

[Security] from the menu and press the

ENTER button.

The Release Code input screen will be displayed.

3. Enter your keyword in the Release Code input screen.

You can view the projected image.

NOTE: Do not forget your keyword. However, if you forget your keyword, NEC

or your dealer will provide you with your Release Code. See more information

at the end of this section.

To turn on the projector when Security is enabled (when using a

PC card as a protect key).

1. Insert your registered PC card into the PC card slot.

2. Press and hold the POWER button for a minimum of two seconds.

The projector will turn on and then recognize the PC card. Once the

image has been projected, it will stay on without the PC card.

• The security disable mode is maintained until the main power is turned

off (by setting the main power switch to "O" or unplugging the power

cord).

In the following cases you will be asked to check the protect key or

input the keyword:

(1) When "OK" is selected at an image for which security is set and

the power is turned off then back on

(2) When the main power is turned off then back on while the secu-

rity function is enabled

(3) When you attempt to display an image for which security is set

while the security function is enabled

• Blanks (spaces) cannot be used in the Keyword section.

To delete PC card data you registered.

1. Use the SELECT

̆̄

button to select "Delete" and use the SELECT

button to select the list window.

2. Use the SELECT

̆̄

button to select the PC card data you wish to

delete.

3. Press the SELECT

button to select "Delete" and press the ENTER

button.

The PC card data will be deleted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec mt 860 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec mt 860

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info