Bedienungsanleitung Nec mt 860 (Seite 52 von 65) (Englisch)

214296

Zoom out

Zoom in

Vorherige Seite

1/65

Nächste Seite

E-52

Tools

Provides tools for setting sleep timer, capturing images, displaying files

or changing your background logo in a PC Card and drawing.

NOTE: The "Capture" and "PC Card Files" features are required for a PC card.

Using Sleep Timer

1. Select your desired time between 30 minutes and 16 hours: Off, 0:30,

1:00, 2:00, 4:00, 8:00, 12:00, 16:00.

2. Select “Set” and press the ENTER button on the remote control.

3. The remaining time starts counting down.

4. The projector will turn off after the countdown is complete.

NOTE:

• To cancel the preset time, set "Off" for the preset time or turn off the power.

• When the remaining time reaches 3 minutes before the projector is turned off,

the "Projector will turn off in 3 minutes" message will be displayed on the

bottom of the screen.

Using Capture

Allows you to capture an image from a source that is currently being

displayed. The image is saved as JPEG in the PC card. When you se-

lect Capture from the menu, you will get a tool bar. You can capture an

image directly using the tool bar when the menu is not displayed.

See page E-30.

Using PC Card Files

The PC Card Files feature allows you to display a list of all the files

stored in the PC card so that you can select a file you want to display.

You can also sort files by file name or date, or display the file. See page

E-31.

Changing Background Logo:

You can change the default background logo using the PC Card Files

feature.

NOTE: File size must be 256KB or less. Other file formats than JPEG and BMP

are not available. See page E-27.

If you've lost your registered PC card, proceed as follows:

NOTE: NEC or your dealer will provide you with your Release Code in exchange

for your registered keyword and Request Code. See more information at the end

of this section.

1. Press and hold the POWER button for a minimum of two seconds.

The projector will be turned on and display a message to the effect

that the projector is security-protected.

2. Select [Projector Options]

→

[Security] from the menu and press hte

ENTER button.

The Release Code input screen will be displayed as well as your

Request Code (24 alphanumeric characters).

3. Enter your Release Code in the Release Code Input screen.

* If the projector is turned on by entering the Release Code, your Se-

curity will be disabled.

NOTE:

* Some types of PC cards cannot be registered as your protect key.

* It is recommended that you register two or more PC cards in case you lose or

damage your registered PC card.

* Formatting your registered PC card will disable your protect key function.

NOTE:

For additional information visit:

US : http://www.necvisualsystems.com

Europe : http://www.nec-europe.com/

Global : http://www.nec-pj.com/

NOTE: The progress indicator shows the percentage of remaining bulb life. The

value informs you of the amount of lamp and projector usage respectively.

Remaining Lamp Time Display

When the remaining lamp time reaches 0, the Remaining Lamp Time

bar indicator changes from 0% to 100 Hours and starts counting down.

If the remaining lamp time reaches 0 hours, the projector will not turn on

regardless of whether the lamp mode is set to Normal or Eco.

Returning to Factory Default

The Factory Default feature allows you to change adjustments and set-

ting to the factory preset for source except the following:

All Data ......................... Reset all the adjustments and settings for

all the signals to the factory preset except

Remaining Lamp Time, Lamp Hour Meter,

Filter Usage, Projector Usage, Language,

Background, Communication Speed, LAN

Mode, Security and Password.

Including Entry List:

Also deletes all the signals in the Entry List

and returns to the factory preset.

Current Signal ............... Resets the adjustments for the current sig-

nal to the factory preset levels.

All the items in "Picture", "Sound", "Image

Options" and "Picture Management" can be

reset.

[Page 1]

Source Name

Input Terminal

Entry No.

Horizontal Frequency

Vertical Frequency

Sync Polarity

[Page 2]

Signal Type

Video Type

Sync Type

Interlace

[Page 3]

Remaining Lamp Time (%)

Lamp Hour Meter (H)

Filter Usage (H)

Projector Usage (H)

Using ChalkBoard

The ChalkBoard feature allows you to write and draw messages on a

projected image. See page E-27

NOTE: This feature is available only when using with USB mouse. See page E-

26.

Help

Contents

Provides an online help about how to use the menus. An underlined link

means that you can move to an adjustment item directly.

Selecting the underlined link and pressing ENTER moves to the corre-

sponding adjustment item.

Information

Displays the status of the current signal, and the lamp and the projector

usage hours. This dialog box has three pages.

The information included are as follows:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec mt 860 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec mt 860

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info