Bedienungsanleitung Nec MT1056 (Seite 5 von 55) (Englisch)

654050

Zoom out

Zoom in

Vorherige Seite

1/55

Nächste Seite

E – 5

1. INTRODUCTION

Introduction to the MT1056 Projector

This section introduces you to your new MT1056 (XGA) Projector and

describes the features and controls.

Congratulations on Your Purchase of The

MT1056 Projector

The MT1056 is one of the very best projectors available today. The

MT1056 enables you to project precise images up to 300 inches (mea-

sured diagonally) from your PC or Macintosh computer (desktop or

notebook), VCR, DVD player, document camera, a laser disc player or

PC Card Viewer.

You can use the projector on a tabletop or cart, you can use the projec-

tor to project images from behind the screen, and the projector can be

permanently mounted on a ceiling*

. The remote control can be used

wirelessly.

Features you’ll enjoy:

• Simple set up and operation.

• Hot air blown from the vents does not bother the audience during

your presentation since the vents are located at the front of the pro-

jector.

• A high-performance 200 watt NSH lamp.

• The supplied wireless remote control that operates the projector from

any angle.

• The image can be projected between 30 and 300 inches (measured

diagonally).

• Keystone correction allows you to correct trapezoidal distortion so

that the image is square.

• You can choose between video modes depending on your source:

“normal” for a typical picture, “natural” for true color reproduction.

• The built-in PC Card Viewer allows you to start your presentation

even when a PC is not available at the site.

• The “Capture” enables you to capture the current projected image.

• An image can be projected from in front or behind a screen, and the

projector can even be installed on the ceiling.

• NEC Solutions’ exclusive Advanced AccuBlend intelligent pixel blend-

ing technology - an extremely accurate image compression technol-

ogy - offers a crisp image with UXGA (16001200) resolution*

• Supports most IBM VGA, SVGA, XGA, SXGA/UXGA(with Advanced

AccuBlend)*

, Macintosh, component signal (YCbCr / YPbPr) or any

other RGB signals within a horizontal frequency range of 15 to 100

kHz and a vertical frequency range of 50 to 120 Hz. This includes

NTSC, PAL, PAL60, SECAM and NTSC4.43 standard video signals.

NOTE: Composite video standards are as follows:

NTSC: U.S. TV standard for video in U.S. and Canada.

PAL: TV standard used in Western Europe.

PAL60: TV standard used for NTSC playback on PAL TVs.

SECAM: TV standard used in France and Eastern Europe.

NTSC4.43: TV standard used in Middle East countries.

• The supplied remote control can be used without a cable, and you

can even use the remote control and mouse adapter to operate your

PC or Macintosh mouse wirelessly from across the room with the

built-in remote mouse receiver.

• You can control the projector with a PC using the PC Control port*

• USB terminal allows USB mouse operation*

• The contemporary cabinet design is light, compact, easy to carry,

and complements any office, boardroom or auditorium.

• Eight pointers are available for your presentation.

Do not attempt to mount the projector on a ceiling yourself. The pro-

jector must be installed by qualified technicians in order to ensure

proper operation and reduce the risk of bodily injury. In addition, the

ceiling must be strong enough to support the projector and the in-

stallation must be in accordance with any local building codes. Please

consult your dealer for more information.

A UXGA (16001200) and SXGA (12801024) image are con-

verted to an XGA (1024768) crisp image with NEC Solutions’ Ad-

vanced AccuBlend.

The PC Control Utility 1.0 is required. This program is included on

the supplied CD-ROM.

The USB terminal meets the USB1.1 specification and accepts a

USB mouse only.

Getting Started

The fastest way to get started is to take your time and do everything

right the first time. Take a few minutes now to review the user’s manual.

This may save you time later on. At the beginning of each section of

the manual you’ll find an overview. If the section doesn’t apply, you can

skip it.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec MT1056 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nec MT1056

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info