Bedienungsanleitung Nec VT45 (Seite 44 von 54) (Englisch)

488898

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

E–36

[Page 4] (Advanced mode)

Setup

Page1 Page2 Page3 Page4

Default Source Select

Communication Speed

Select

19200bps

Control Panel Key Lock

Clear Lamp Hour Meter

Clear Filter Usage

Default Source RGB

Unlock

[Page 3] (Advanced mode)

Setup

Page1 Page2 Page3 Page4

Auto Adjust

Auto Start

Power Management

Keystone Save

Fan High Speed Mode

On Off

Power Off Confirmation On Off

On Off

When “Auto Adjust” is set to “On”, the projector automati-

cally determines the best resolution for the current RGB in-

put signal to project an image using NEC’s Advanced

AccuBlend Intelligent Pixel Blending Technology.

The image can be automatically adjusted for geometry and

stability; “Horizontal Position”, “Vertical Position”, “Clock”

and “Phase”.

On: Automatically adjusts image “Horizontal

Position”, “Vertical Position”, “Clock” and

“Phase”.

Off: User can adjust the image display functions

(“Horizontal Position”, “Vertical Position”,

“Clock” and “Phase”) manually.

Turns the projector on automatically when the power cable

is inserted into an active power outlet and the main power

switch is on. This eliminates the need to always use the

“Power” button on the remote control or projector cabinet.

When this option is on and there is no RGB input for five

minutes or more, the projector will automatically turn itself

off.

NOTE:This feature does not work with Video or S-Video

sources.

This option determines whether a confirmation dialog for

turning off the projector will appear or not.

NOTE: When the confirmation message is displayed, you

must be in the Projector mode to operate your projector us-

ing the remote control. If not, press the PJ button on the

remote control to change your projector to the Projector

mode. The button lights to indicate that you are in the Pro-

jector mode.

This option enables you to save your current keystone set-

tings. Saving your change once affects all sources. The

changes are saved when the projector is off.

This option allows you to select two modes for fan speed:

high-speed mode and normal speed mode.

When you wish to cool down the temperature inside the pro-

jector, select the high-speed mode. High-speed mode is rec-

ommended when the projector is used in the high- tempera-

ture environment.

You can set the projector to default to any one of its inputs

each time the projector is turned on.

Last: Sets the projector to default to the previous

or last active input each time the projector

is turned on.

Auto: Searches for an active source in order of

RGB → Video → S-Video and displays the

first found source.

Select: Displays the selected source input every

time the projector is started up. Select an

input from the pull-down menu.

This feature sets the baud rate of the PC Control port (Mini

DIN 8 Pin).

it supports data rates from 4800 to 19200 bps.

The default is 19200 bps. Select the appropriate baud rate

for your equipment to be connected.

This option turns on or off the Control Panel Key Lock func-

tion.

NOTE:

• When the cabinet buttons are not locked, “Control Panel

Key Lock - Unlock” will be displayed. When the cabinet

buttons are locked, “Control Panel Key Lock - Lock”

will be displayed.

• This Control Panel Key Lock does not affect the remote

control and the PC Control functions.

Setup

Page1 Page2 Page3 Page4

Default Source Select

Communication Speed

Select

19200bps

Control Panel Key Lock

Clear Lamp Hour Meter

Clear Filter Usage

Default Source RGB

Unlock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec VT45 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info