Bedienungsanleitung Nec wt 600 (Seite 56 von 71) (Englisch)

214297

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

6-23

Security

The Security function enables you to protect your projector so

that the projector will not project a signal unless you enter a

keyword. There is also an option to lock the projector by using a

registered PC card as a protect key. Once you have registered

your PC card as a protect key, you are required to insert the

registered PC card into the PC card slot of the projector each

time you turn on the projector. You can enable the Security func-

tion by using a keyword only.

Enable/Disable ........ This turns the Security function on or

off.

Keyword .................. Enter an appropriate keyword when you

use the Security function.

(Up to 10 characters can be used.)

The Security function is available only when your keyword is

entered.

Use Protect key ....... Check this box to lock your projector

when using a PC card. To use a key-

word without a PC card, do not check

this box.

Drive ........................ Switches between PC Card slots.

Read ........................ Reads data of a PC card.

The Security function is not available un-

less at least one PC card is registered.

(if the “Use Protect key” check box is

selected) Up to 5 PC cards can be reg-

istered.

Delete ...................... Deletes data of a registered PC card.

To set up a keyword to enable the Security function without us-

ing a registered PC card.

1. Use the SELECT

̆̄

button to select “Keyword” and use the

software keyboard to enter a keyword.

NOTE: Please make a note of your keyword.

2. Use the SELECT

̆̄

button to select “Enable” and use the

SELECT

̆̄

button to select “OK”, then the Security function

will be enabled. An “Are you sure?” message will appear. Use

the SELECT

̇̈

button and press the ENTER button.

The Security function takes effect.

To register a PC card as a protect key.

1. Insert a PC card into the PC card slot of the projector.

2. Use the SELECT

̆̄

button to select “Use Protect key” and

press the ENTER button. A check mark will be placed.

3. Use the SELECT

̆̄

button to select "Read" and press the

ENTER button.

Data of the PC card will be read into the projector.

4. Use the SELECT

̆̄

button to select "Register" and press

the ENTER button.

Downloaded data will be registered and be displayed in the

list window.

5. Use the SELECT

̆̄

button to select "Keyword" and use the

software keyboard to enter a keyword.

NOTE: To use a PC card as a protect key, you must also set up a

keyword. Please make a note of your keyword.

This completes registration of your PC card.

To enable Security, use the SELECT ̆̄ button to select "En-

able" and use the SELECT ̆̄ button to select "OK" and "Se-

curity function will be enabled. An “Are you sure?" message will

appear. Use the SELECT ̇̈ button and press the ENTER but-

ton.

The Security function takes effect.

To turn on the projector when Security is enabled (when using

your keyword only).

1. Press and hold the POWER button for a minimum of two sec-

onds.

The projector will be turned on and display a message to the

effect that the projector is security-protected.

2. Select [Projector Options]

→

[Security] from the menu and

press the ENTER button.

The Release Code input screen will be displayed.

3. Enter your keyword in the Release Code input screen.

You can view the projected image.

NOTE: Do not forget your keyword. However, if you forget your key-

word, NEC or your dealer will provide you with your Release Code.

See more information at the end of this section.

6. Using On-Screen Menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nec wt 600 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info