Bedienungsanleitung Neff B45C42N3 (Seite 9 von 40) (Englisch)

495331

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Before using the appliance for the first time

Once your new appliance has been connected, ™…„ appears

in the temperature display. Before you can use your appliance,

you must make a few settings:

■ Set the water hardness range

■ Calibrate the altitude

■ Set the clock

■ Clean the appliance before using it for the first time

Note: You can correct these settings at any time. For

information about changing the water hardness range and the

altitude difference, see chapter: Changing the basic settings;

and for information about setting the clock, see chapter:

Electronic clock.

Setting the water hardness range

Caution!

The appliance may become damaged due to the use of

unsuitable liquids.

Do not use distilled water, highly chlorinated tap water

(> 40 mg/l) or other liquids.

Only use cold, fresh tap water, softened water or uncarbonated

mineral water.

The water hardness “hard“ (

™…„) is the default setting. Change

the setting if the water is softer.

You can determine the water hardness with the test strips

supplied or ask your water supplier.

Notes

■ If your water is very hard, we recommend that you use

softened water.

■ If you use only softened water, you can, in this case, set your

appliance to the softened water hardness range.

■ If you use mineral water, then set the water hardness range to

hard.

■ If you use mineral water, then it must be non-carbonated (see

chapter: Filling and emptying the water tank).

1. Use the temperature selector to set the water hardness

range.

2. Press and hold the ± info button for 3 seconds.

Your setting is saved.

™†‚ appears in the temperature

display.

Calibrating the altitude

The altitude difference range “0 - 300m“ (™†‚) is the default

setting. Change this setting if the location of the appliance is

higher or lower than this.

1. Use the temperature selector to set the altitude difference

range.

2. Press and hold the ± info button for 3 seconds.

Your setting is saved.

Setting the clock

Note: When you press the KJ clock function button, you have

3 seconds to set the clock using the rotary selector. Should this

have been insufficient for you, you can amend the clock time

later.

‹:‹‹ flashes in the clock display.

1. Briefly press the KJ clock function button to go to the

setting mode.

The

KJ and 3 symbols light up. ‚ƒ:‹‹ appears in the

clock display.

2. Set the current time using the rotary selector.

Your setting is accepted after 3 seconds.

Changing the clock

To subsequently change the time, press the

KJclock function

button repeatedly until the

KJ and 3 symbols light up again.

Change the time with the rotary selector.

Cleaning the appliance

Clean your appliance before using it for the first time.

1. Remove the accessories from the cooking compartment.

2. Completely remove any residual packaging (e.g. chips of

polystyrene) from the cooking compartment.

3. Clean the accessories and cooking compartment with hot

soapy water (see section: Cleaning and care).

4. Fill the water tank with 400 ml water (see section: Filling and

emptying the water tank).

5. Slide in the water tank all the way.

6. Switch on the appliance. To do this, press the operating

mode selector so that it pops out.

The appliance is then ready for use.

7. Using the operating mode selector, set % Top/bottom heat

(see section: Operating the appliance).

Water hardness range Setting symbol (temperature dis-

play)

softened

™…‹

soft

™…‚

medium

™…ƒ

hard

™…„

Altitude difference

range

Setting symbol (temperature dis-

play)

Under 0m

™†‹

0 - 300m

™†‚

300 - 600m

™†ƒ

600 - 900m

™†„

900 - 1200m

™†…

1200 - 1500m

™††

1500 - 1800m

™†‡

1800 - 2100m

™†ˆ

2100 - 2400m

™†‰

above 2400m

™†Š

Altitude difference

range

Setting symbol (temperature dis-

play)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff B45C42N3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff B45C42N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info