Bedienungsanleitung Neff C47C62N3 (Seite 12 von 40) (Englisch)

495369

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

After each use

Emptying the water tank.

1. Open the appliance door carefully.

Hot steam will escape.

2. Remove and clean the water tank.

3. Thoroughly dry the seal in the tank cover and the tank recess

in the appliance.

Caution!

Do not dry the water tank in the hot cooking compartment. This

will damage the water tank.

Drying the cooking compartment

: Risk of scalding!

The water in the evaporator dish may still be hot. Allow it to cool

before wiping.

1. Leave the appliance door ajar until the appliance has cooled

down.

2. Once it has cooled down, wipe out the cooking compartment

and the evaporator dish with the enclosed cleaning sponge

and dry well with a soft cloth.

3. Remove food residues from the cooking compartment as

soon as the appliance has cooled. Burnt-on remains will be

much harder to remove later.

4. Wipe kitchen units or handles if condensation has formed on

them.

Electronic clock

In this section, you can read about

■ how to set the timer

■ how to switch your appliance off automatically (cooking time

and end of operation)

■ how to switch your appliance on and off automatically (preset

operation)

■ how to set the time

Clock display

Notes

■ Between the times ƒƒ:‹‹ and †:†Š the clock display is

dimmed if you do not make any settings in that period or no

clock function is activated.

■ When you set a clock function, the time interval increases

when you set higher values (e.g. cooking time up to

‚:‹‹œ to

the minute, using

‚:‹‹œ

to the nearest 5 minutes).

■ For the Q minute minder, x cooking time, y end of

operation and preselection mode clock functions, a signal

sounds when the settings have elapsed and the

Q or y

symbol flashes. To cancel the audible signal before it ends,

press the

KJ clock function button.

■ Briefly press the KJ clock function button to select a clock

function. You then have 3 seconds to set the selected clock

function. After this time, the setting mode is exited

automatically.

Switching the clock display on and off

1. Press and hold the KJclock function button for 6 seconds.

The clock display switches off. If a clock function is active,

the associated symbol remains lit.

2. Press the KJclock function button briefly.

The clock display switches on.

Timer

1. Press the KJclock function button repeatedly until the KJ

and

Q symbols light up.

2. Set the duration using the rotary selector (e.g. †:‹‹ minutes).

The setting is applied automatically. Then the clock is

displayed again and the minute minder starts counting down.

&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU

Clock function Use

Minute minder You can use the minute minder as an egg timer or a kitchen timer. The appliance does

not switch on or off automatically

Cooking time The appliances switches off automatically after a cooking time setting has elapsed

(e.g.

‚:„‹ hours)

End of operation

The appliance switches off automatically at a set time (e.g.

‚ƒ:„‹ o'clock)

Preset operation The appliance switches on and off automatically. Cooking time and end of operation

have been combined.

Clock Setting the clock

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff C47C62N3 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff C47C62N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info