Bedienungsanleitung Neff C47C62N3 (Seite 13 von 40) (Englisch)

495369

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Cooking time

Automatic switch-off after a cooking time setting has elapsed.

1. Set the operating mode and temperature.

2. Press the KJ clock function button repeatedly until the KJ

and

x symbols light up.

3. Set the cooking time with the rotary selector

(e.g.

‚:„‹ hours).

4. Press the Start button.

When

é steam cooking, the cooking time does not start until

the heating up time has elapsed.

Once the cooking time has elapsed, the appliance switches off

automatically.

1. Turn the operating mode selector back to the Û position.

2. Press the KJ clock function button to exit the clock function.

End of operation

Automatic switch-off at a set time. This function is only possible

for operating modes that do not use steam.

1. Set the operating mode and temperature. Press the Start

button.

The appliance heats up.

2. Press the KJ clock function button repeatedly until the KJ

and

y symbols light up.

3. Set the end of operation using the rotary selector

(e.g.

‚ƒ:„‹ o'clock).

The setting is applied automatically. The clock is then

displayed again.

The appliance switches off automatically at the time set for the

end of operation.

1. Turn the operating mode selector back to the Û position.

2. Press the KJ clock function button to exit the clock function.

Preset operation

The appliance switches on automatically, then switches off

automatically at the time preselected for the end of operation.

Bear in mind that food that spoils easily must not stay in the

cooking compartment for too long.

Preselection mode is not possible with some of the automatic

programmes.

When é Steam cooking, the cooking time does not start until

the heating up time has elapsed. The end of operation which

was set is therefore delayed by the length of time required for

heating-up.

1. Set the operating mode and temperature.

2. Press the clock function button repeatedly until the KJ and

x symbols light up.

3. Set the cooking time with the rotary selector

(e.g.

‚:„‹ hours).

4. Press the clock function button repeatedly until the KJ

and

y symbols light up.

5. Set the end of operation using the rotary selector

(e.g.

‚ƒ:„‹).

6. Press the Start button.

The appliance waits until the appropriate time to switch on (in

the example at

‚‚:‹‹).

The appliance switches off automatically at the time set for the

end of operation (

‚ƒ:„‹). A signal sounds and the y symbol

flashes.

1. Turn the operating mode selector back to the Û position.

2. Press the clock function button to end the preselection mode.

Setting the clock

You can only change the clock when no other clock function is

active.

1. Press the KJ clock function button repeatedly until

the

KJand 3 symbols light up.

2. Set the clock using the rotary selector.

The setting is applied automatically.

Checking, correcting or deleting settings

1. To check your settings, press the KJ clock function button

repeatedly until the corresponding symbol lights up.

2. If necessary, you can correct your setting using the rotary

selector.

3. If you wish to cancel your setting, turn the rotary selector anti-

clockwise to the original value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff C47C62N3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff C47C62N3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info