Bedienungsanleitung Neff N64TD00N0 (Seite 8 von 60) (Englisch, Italienisch, Spanisch)

621729

Zoom out

Zoom in

Vorherige Seite

1/60

Nächste Seite

en Operating the appliance

1Operating the appliance

Operating the appliance

In this section, you can find out how to set your

appliance. In the table, you can find the settings for

various dishes.

Grilling with water and lava stones

Note: Fill the grill container with water before each use.

Otherwise the appliance will overheat.

The amount of water depends on whether you want to

use lava stones. The lava stones store the heat from the

grill element, leading to intense radiation of heat and

even heat distribution.

Filling with water and lava stones

1. Remove the wire rack and fold up both grill

elements. Remove the lava stone container from the

appliance.

2. Ensure the drain valve is closed.

3. Pour water into the grill container.

Grilling with lava stones: 1 litre (bottom mark)

Grilling without lava stones: 3.5 litres (top mark)

4. To grill with lava stones: Remove the lava stones

from the packaging and place them in the lava stone

container. Place the lava stone container into the

appliance.

5. Fold down the grill heating element and replace the

wire rack.

The grill is ready to use.

Switching on or off

Note: The appliance switches off automatically when

the grill setting remains at 0 for more than 20 seconds.

Switching on

Touch the # symbol.

An audible signal sounds. The indicator above the main

switch lights up. The appliance is ready to use.

Switching off

Touch the # symbol until the indicator above the main

switch goes out.

The appliance is switched off. The residual heat

indicator remains lit until the appliance has cooled

down sufficiently.

Setting the grill

Set the desired grill setting on the control panel.

Grill setting 1 = lowest output

Grill setting 9 = highest output

Setting the grill setting

1. Switch on the grill using the main switch #.

2. Use the p, r or q symbol to select both or just one

of the heating elements.

‹ will light up on the grill setting display.

3. Set the required grill setting using the buttons.

The heating indicator will flash.

Note: The grill regulates the temperature by switching

the grill element on and off. The grill element may also

switch on and off at the highest setting.

Preheating the grill

Only place food on the grill when the preheating time

has elapsed. The preheating symbol goes out. During

the preheating time, the grill heats up at full power.

Thereafter, the temperature is reduced by the heating

elements being switched on and off in order to maintain

a constant temperature for the respective setting.

The preheating time can be between 8 and 10 minutes,

depending on the grill setting.

Note: Preheat the empty grill for a maximum of 8-

12 minutes. A longer preheating time could result in the

appliance switching off (overheating protection). Switch

the appliance off and leave it to cool down before

switching it on again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Neff N64TD00N0 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Neff N64TD00N0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info