Bedienungsanleitung Netgear R7800 - Nighthawk X4S (Seite 20 von 173) (Englisch)

670487

Zoom out

Zoom in

Vorherige Seite

1/173

Nächste Seite

• The first time you set up the Internet connection for your router, the browser goes to

http://www.routerlogin.net and the Configuring the Internet Connection page displays.

• If the NETGEAR installation assistant detects that the router is connected to another router or gateway,

you are prompted to set up the router in router mode or access point mode. See Automatic Internet

Setup With Two Routers on page 20.

• If you already set up the Internet connection, enter http://www.routerlogin.net in the address field

for your browser to start the installation process.

4. Follow the onscreen instructions.

The NETGEAR installation assistant guides you through connecting the router to the Internet.

5. If the browser does not display a router page, do the following:

• Make sure that the computer is connected to one of the LAN Ethernet ports or over WiFi to the router.

• Make sure that the router is receiving power and that its Power LED is lit.

• Close and reopen the browser or clear the browser cache.

• Browse to http://www.routerlogin.net.

• If the computer is set to a static or fixed IP address (this setting is uncommon), change it to obtain

an IP address automatically from the router.

6. If the router does not connect to the Internet, do the following:

a. Review your settings. Make sure that you selected the correct options and typed everything correctly.

b. Contact your ISP to verify that you are using the correct configuration information.

c. Read You Cannot Access the Internet on page 166. If problems persist, register your product and

contact NETGEAR technical support.

When the router connects to the Internet, you are prompted to download and install the free NETGEAR Desktop

genie app and the free ReadySHARE Vault app.

Automatic Internet Setup With Two Routers

You can let the NETGEAR installation assistant set up your router automatically, or you can set up your

router manually. Before you start the setup process, get your ISP information and make sure that the

computers and devices in the network are using the settings described here. If you are connecting only one

router to your Internet connection, see Automatic Internet Setup on page 19.

When your Internet service starts, your Internet service provider (ISP) typically gives you all the information

needed to connect to the Internet. For DSL service, you might need the following information to set up your

router:

• The ISP configuration information for your DSL account

• ISP login name and password

• Fixed or static IP address setting (special deployment by ISP; this setting is rare)

If you cannot locate this information, ask your ISP to provide it.When your Internet connection is working,

you no longer need to launch the ISP login program on your computer to access the Internet. When you

start an Internet application, your router automatically logs you in.

Connect to the Network and Access the Router

Nighthawk X4S AC2600 Smart WiFi Router

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear R7800 - Nighthawk X4S Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Netgear R7800 - Nighthawk X4S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info