Bedienungsanleitung Netgear WAC505 (Seite 34 von 149) (Englisch)

710463

Zoom out

Zoom in

Vorherige Seite

1/149

Nächste Seite

(Continued)

DescriptionSetting

Select one of the following WiFi security options for the VAP:

• Open. An open WiFi network does not provide any security. Any WiFi device can

join the network. We recommend that you do not use an open WiFi network but

configure WiFi security. However, an open network might be appropriate for a WiFi

hotspot.

• WPA2-PSK. This option is the default setting and uses AES encryption. This type

of security enables only WiFi devices that support WPA2 to join the VAP. If you did

not change the passphrase, the default passphrase displays.The default passphrase

is sharedseceret.

WPA2 provides a secure connection but some legacy WiFi devices do not detect

WPA2 and support only WPA. If your network includes such older devices, select

the mixed mode security, WPA-PSK / WPA2-PSK.

In the Passphrase field, enter a phrase of 8 to 63 characters. To join the VAP, a

user must enter this passphrase.To view the passphrase in clear text, click the eye

icon.

• WPA-PSK / WPA2-PSK. This mixed mode security enables WiFi devices that

support either WPA or WPA2 to join the VAP. This option uses TKIP and AES

encryption.

WPA-PSK (which uses TKIP) is less secure than WPA2-PSK (which uses AES) and

limits the speed of WiFi devices to 54 Mbps.

In the Passphrase field, enter a phrase of 8 to 63 characters. To join the VAP, a

user must enter this passphrase.To view the passphrase in clear text, click the eye

icon.

• WPA2-enterprise. This enterprise-level security uses RADIUS for centralized

Authentication, Authorization, and Accounting (AAA) management. For WPA2

Enterprise security to function, you must set up RADIUS servers (see Set Up RADIUS

Servers on page 85).

From the Data Encryption menu, select the data encryption mode mode:

- TKIP + AES. This type of data encryption enables WiFi devices that support

either WPA or WPA2 to join the access point’s WiFi network. This is the default

mode.

- AES.This type of data encryption provides a secure connection but some older

WiFi devices do not detect WPA2 and support only WPA. Therefore, if your

network includes such older devices, select TKIP + AES security.

Network Authentication,

Data Encryption, and

Passphrase

Protected Management Frames (PMF), according to the 802.11w standard, is a security

feature that protects unicast and multicast management frames from being intercepted

and changed for malicious purposes. This feature is disabled by default, but you can

enable it.

802.11w (PMF)

7. Click the Apply button.

Your settings are saved.

8. Make sure that you can connect to the new WiFi network.

If you cannot connect to the new WiFi network, check the following:

Manage the Basic WiFi and Radio Features

Insight Managed Smart Cloud Wireless Access Point WAC505 User Manual

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Netgear WAC505 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info