Bedienungsanleitung NetworX NX-584 HOME AUTOMATION MODULE (Seite 6 von 12) (Englisch)

629275

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

NX-584 Home Automation

Numerical Data: Numerical data is programmed by using the numeric keys of the system keypad to

enter a number from 0-255. To view the data in a location, a binary process is used. With this

process, the LED’s for zones 1 through 8 are utilized, and the numeric equivalents of their illuminated

LED’s are added together to determine the data in a programming location. The numeric equivalents

of these LED’s are as follows:

Zone 1 LED = 1 Zone 3 LED = 4 Zone 5 LED = 16 Zone 7 LED = 64

Zone 2 LED = 2 Zone 4 LED = 8 Zone 6 LED = 32 Zone 8 LED = 128

Example: If the numerical data to be programmed in a location is "66", press [6]-[6] on the keypad.

The LED’s for Zone 2 and Zone 7 will become illuminated indicating 66 is in that location (2 + 64 =

66). Once the data is programmed, press the [r] key to enter the data and advance to the next

segment of that location. After the last segment of a location is programmed, pressing the [r] key will

exit that location, turn the "Ready" LED off and the "Armed" LED on. As before, you are now ready to

enter another programming location. If an attempt is made to program a number too large for a

particular segment, the keypad sounder will emit a triple beep, indicating an error, and remain in that

segment awaiting a valid entry.

Feature Selection Data: Feature selection data will display the current condition (on or off) of eight

features associated with the programming location and segment selected. Pressing a button on the

touchpad (1 through 8) that corresponds to the "feature number" within a segment will toggle (on/off)

that feature. Pressing any numeric key between [1] and [8] for selection of a feature will make the

corresponding LED illuminate (feature ON). Press the number again, and the LED will extinguish

(feature OFF). You will see that numerous features can be selected from within one segment. For

instance, if all eight features of a segment are desired, pressing [1]-[2]-[3]-[4]-[5]-[6]-[7]-[8] will turn on

LED's 1 through 8 as you press the keys, indicating that those features are enabled.

LCD KEYPAD USERS NOTE:

The numbers of the enabled features will be displayed. However, the features not enabled will

display a hyphen (-). After the desired setting of features is selected for this segment, press the [r]

key. This will enter the data and automatically advance to the next segment of the location. When you

are in the last segment of a location and press the [r] to enter the data, you will exit that location.

This will now turn the "Ready" LED off and the "Armed" LED on. As before, you are now ready to

enter another programming location.

VIII.

LEDS INDICATORS

LED

INDICATIONS

DS1

Flashes for NetworX buss

DS3

Flashes for each valid packet received from host

DS4

Flashes for each packet transmitted to host

DS5

On when waiting for NetworX function to be completed

DS6

On when waiting for acknowledgement from host

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NetworX NX-584 HOME AUTOMATION MODULE Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info