619037
29
Zoom out
Zoom in
Vorherige Seite
1/40
Nächste Seite
29EN
10-570
2: Transmitting a control function / operating a contact
Control and Light
1 Contact 1 .
2 Contact 2
3 Contact 3
4 Licht Contact
Back Up Down OK
You can operate various contacts via this menu. When the contact is selected, the device
transmits a specific control function. These control functions can be taught to a programmable
relay (10-830, 10-836 or 10-837).
“Contact 1” = control function 8 + serial number of the device.
“Contact 2” = control function 9 + serial number of the device.
“Contact 3” = control function 10 + serial number of the device.
“Light Contact” switches the light circuit relay in the power supply.
You can operate relay 10-831, without programming, by using “Contact 1”.
3: Setting automatic functions
Automat Functions
Floor Door Open: Disable
Call Divert: Disable
Doormatic: Disable
Back Up Down OK
Floor Door: After a floor call, the local door lock can be operated with a programmable relay
10-83x using control function 11 (CF 11). If is pressed within 30 seconds after a floor call,
this control function is transmitted.
Call Divert: If this function is active, the call will be diverted to another internal unit.
Doormatic: If this function is active, the door will automatically open when there is a call (ring-
and-come-in function). This option can be used in home practices of offices with free access.
The green LED lights up if this function is activated.
At the time of delivery, only the “Doormatic” function is available. You, as the installer, can
make the other functions available to the user. See section 4.2.3: “Changing the installation
parameters”.
4: Changing the settings
Intercom Setting
1 User .
2 Installer
Back Up Down OK
Both the user and the installer can change certain settings.
However, the installer’s settings menu is secured so that the technical settings cannot be
changed by the user.
4.1: Changing the settings for the user
User
Key Tone: Disable
Ring Vol: 
Bright: 
Contrast: 
Color: 
Back Up Down OK
The beep sound that occurs when the keys on the internal unit are touched can be switched
on or off here.
Both the ring volume and the image settings can be changed.
29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Niko 10-570 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Niko 10-570

Niko 10-570 Bedienungsanleitung - Deutsch, Englisch, Holländisch, Französisch - 32 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info