619203

Niko 350-20082 Seite 8

8
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
EN nv Niko sa Industriepark West 40, BE-9100 Sint-Niklaas, Belgium — tel. +32 3 778 90 00 — fax +32 3 777 71 20 — e-mail: support@niko.be — www.niko.eu PM350-20082R15342
350-20082
8
4. IR REMOTE CONTROL
In addition to adjusting the settings manually using the potentiometers and DIP switches on the device, you can
also use the IR remote control (fig. 7) to select another application, perform a test or enter other parameters.
4.1. Function buttons
Button Function
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
You
switch the light permanently on or off
, irrespective of the detected
movement and the light level.
1. Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
to switch the lighting on or off.
If the function is activated, the red indication LED will flash (1 s on, 10 s off).
2. Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
to switch the lighting on or off again.
3. Press times one after the other (as explained above) or activate the detector using
the push button to exit this mode.
The detector will return to the selected settings. The red indication LED will flash
once to confirm.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
You
switch the light permanently on or off
, irrespective of the detected
movement and the light level.
1. Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
to switch the lighting on or off.
If the function is activated, the blue indication LED will flash (1 s on, 10 s off).
2. Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
to switch the lighting on or off again.
3. Press times one after the other (as explained above) or activate the detector using
the push button to exit this mode.
The detector will return to the selected settings. The red indication LED will flash
once to confirm.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
You switch the indication LED on or off.
The green indication LED will flash once when this function is deactivated and twice
when activated.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
If you press this button, the device will show the
current settings for channel 1
via the indication LEDs.
First, the green indication LED flashes once, after which the red indication LED
indicates the status. The first time the red indication LED flashes, it indicates the lux
level you set; the second time, this LED refers to the switch-off delay (see also the
tables in section 3.3.).
Example: Channel 1 is set at 300 lux and 10 minutes. Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
: the green
indication LED flashes once and the red indication LED flashes five times (= 300
lux), after which the green indication LED flashes once again and the red indication
LED flashes four times (= 10 min).
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
If you press this button, the device will show the
current settings for channel 2
via the indication LEDs.
First, the green indication LED flashes once, after which the
blue
indication LED
indicates the status. The first time the
blue
indication LED flashes, it indicates the lux
level you set; the second time, this LED refers to the switch-off delay (see also the
tables in section 3.3.).
Example: Channel 1 is set at 300 lux and 10 minutes. Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
: the green
indication LED flashes once and the
blue
indication LED flashes five times (= 300
lux), after which the green indication LED flashes once again and the
blue
indication
LED flashes four times (= 10 min).
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
The detection area is tested by activating the integrated motion sensor for the
walking test
:
- Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
three times within five seconds to unlock the device.
- The green indication LED flashes twice to confirm. The device is now in ‘set’ mode.
- Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
- Both channels are activated.
- The blue indication LED lights up when you activate the test mode and no
movement is detected by the sensor.
- Lighting is switched on for five seconds and the red indication LED lights up each
time the sensor detects activity.
- If no activity is detected and the sensor is still in test mode, the blue indication LED
lights up.
- Complete the walking test by pressing
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
again.
- Lock the device by pressing
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
again.
- If you forget to close the test mode, the detector will return to the selected settings
after five minutes.
The light sensor does not work during the walking test.
You can also activate the walking test via the potentiometer for the switch-off delay.
4.2. ‘Set’ buttons
To change the settings of the detector:
1. Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
three times within five seconds to unlock the device.
The green indication LED flashes twice to confirm. The device is now in ‘set’ mode.
2. Change the light level or the switch-off delay using the buttons below.
3. Press
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
once to lock the device again.
The green indication LED flashes twice to confirm. The modified setting is activated and the device will return
to the selected settings.
Note: If you do not lock the device, it will be locked automatically after two minutes. All changes will then be
saved automatically.
Button Function
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1
Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
Press this button to set the lux value and/or the switch-off delay
for channel 1.
The red indication LED indicates that you can adjust the setting.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1
Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
Press this button to set the lux value and/or the switch-off delay
for channel 2.
The
blue
indication LED indicates that you can adjust the setting.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
- With these red buttons, you set the desired light level (lux value).
- There are ten fixed lux values: 20, 50, 100, 200, 300, 400, 500, 700
and 1000 lux and No lux (daylight-independent).
Learn actual lux
- With this button, you set the current light level in the room as the desired
level at which the lighting should be switched on.
- If you press this button, the red indication LED will flash once to indicate that
the current light level is being saved. If this light level is not between 20 and
1000 lux, the minimum level (20 lux) or maximum level (1000 lux) will be saved.
Use this setting if the desired minimum light level in the room has been achieved.
This is the point at which the lighting should be switched on as the daylight
level is no longer sufficient.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
- With these blue buttons, you set the desired switch-off delay.
- There are six fixed values: 2, 5, 10, 15, 30 and 60 minutes.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse
2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
Not applicable.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
Press this button:
- The selected channel will be switched on permanently for eight hours.
This time can, for example, be used to set HVAC installations connected to
this channel.
- The blue indication LED will flash (0.25 s on and 2 s off).
Press this button again to deactivate the function. The blue indication LED
will no longer flash. You cannot switch off this function via a push button.
Lock/
unlock
Short
push
Learn actual lux
20
Lux
50
Lux
100
Lux
300
Lux
400
Lux
200
Lux
500
Lux
700
Lux
1000
Lux
No
Lux
Fact.
setting
Long
push
Test
On/Off
30min 60min15min
8
Hours
Pulse 2min 5min 10min
Ch 1 Ch 2
Status
Ch 1
Status
Ch 2
Light 1
On/Off
Light 2
On/Off
LED
On/Off
The device returns to the factory settings.
5. OPERATION AND USE
5.1. Activation
The detector should not be powered until all cables are connected. After powering the device, the detector will be
ready for use after approximately 120 seconds (warm-up time).
The red indication LED flashes during warm-up time. After the device has warmed up, the green indication LED
will flash briefly twice.
5.2. General operation
The integrated light sensor continuously measures the daylight level in the detection area and compares this level
to the preset lux value. Thanks to the light sensor, the light switches on automatically only if the detector detects
motion within the detection range and if there is insufficient daylight:
• The lighting remains switched on as long as motion is detected and the amount of daylight available in
the room is insufficient.
• After the last motion is detected, the lighting remains switched on for the duration of the preset switch-off
delay (2 to 60 minutes). As soon as the switch-off delay has elapsed, the lighting switches off.
• The lighting also switches off automatically as soon as the daylight level is sufficiently high, even when
motion is still detected in the room at that time.
5.3. Detection range
The detection area can be increased by adding an extra detector (slave) (350-20079, 350-20071 or 350-20081).
A maximum of ten slaves can be connected to one master (350-20082). The lighting is operated in accordance
with the settings on the master. Both the master and the slave have the same detection range (a circle with a
diameter of 24 m). When covering a complete area using several detectors, it is recommended to take into account
an overlap of approximately 30 % (fig. 8).
If you would like to exclude motion detection in a portion of the detection area or if the detection area is too large,
you cover the sensor lens using the cover cap supplied. This allows you to reduce the maximum range to 24 m.
The 360° detection angle can be reduced in steps of 30°.
… 8 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Niko 350-20082 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info