Bedienungsanleitung Nikon Laser 550A S (Seite 23 von 73) (Englisch, Französisch, Portugiesisch, Spanisch)

604470

Zoom out

Zoom in

Vorherige Seite

1/73

Nächste Seite

When 『』and『』symbols do not appear, Limited

mode is switched to Full mode.

Note） If buttons are not pressed in the correct order,

switching will not take place.

Note） This mode change can also be confirmed when

switching the measurement/display mode.

4. Release buttons.

8. Switching Target priority modes (Factory default setting is

First Target Priority mode.)

1. LCD panel should be on.

2. Press and hold

button, then depress and hold

button within 0.5 second.

Note） If the

button is not pressed within 0.5

second, the display unit (m/yd) will be switched.

3. Continue to press and hold both buttons (more than 2

seconds) until First Target Priority mode and Distant Target

Priority mode are switched.

Note: If buttons are not pressed in the correct order,

switching will not take place.

Note: If switching fails to take place, repeat 2.

4. Release buttons.

Note: Because Target Priority mode is not displayed

while Angle mode is set, switching is made but

visual confirmation is impossible. Switch to another

measuring mode for confirmation.

[Deciding which Target Priority to use]

When obtaining different results from a single measuring

operation, the Nikon Laser 550A S will display the distance to the

farthest target on the LCD panel when using Distant Target Priority

mode, while First Target Priority mode will show the range to the

nearest target.

ex.) When measuring a tree standing in front of a house;

"115m" (distance to the tree) will be displayed in First Target Priority

mode, and "128m" (distance to the house) in Distant Target Priority

mode. First Target Priority mode, for example, has applications for

golf, while Distant Target Priority is useful when hunting in heavily

wooded areas.

9. Low battery indication

Flashing

indicates that the battery power is low and

battery should be replaced. (See "Changing Battery")

First Target Priority

[

]

Distant Target Priority

[

]

Tree Fence House

Distance to Target

115m 123m 128m

SpecificationsOperational Summary

Measuring system

Measuring mode display Linear distance : Act

Horizontal distance : Hor

Height : Hgt

Angle : Ang

Verticalseparation(heightbetweentwopoints):Hgt+Hgt2

Measuring distance/ angle

range

Distance: 10-500 meters/11-550 yards

Angle: ± 89°

Distance-

angle

Display

steps

Act

(Linear distance)

0.5 meter/yard ( ＜ 100 meters/yards)

1.0 meter/yard ( ≧ 100 meters/yards)

Hor

(Horizontal distance)

0.2 meter/yard ( ＜ 100 meters/yards)

1.0 meter/yard ( ≧ 100 meters/yards)

Hgt

(Height)

0.2 meter/yard ( ＜ 100 meters/yards)

1.0 meter/yard ( ≧ 100 meters/yards)

Ang (Angle) 0.1°( ＜ 10°),1.0°( ≧ 10°)

Linear distance

Horizontal dist.

Height

Angle

0.5 meter/yard

0.2 meter/yard

0.1°

System First Target Priority/Distant Target Priority switching system

Optical system

Type Roof-prism monocular

Magnification (x) 6

Effective diameter of objective

lens (mm)

ø21

Angular field of view (real) (˚) 6.0

Eye relief (mm) 18.2

Exit pupil (mm) ø3.5

Dioptre adjustment ±4m

-1

Others

Operating temperature (˚) -10—+50

Internal

External

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nikon Laser 550A S Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info