Bedienungsanleitung Nilfisk UZ 934 (Seite 7 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

73347

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

1 To open

a)Pull the fasterners on the cover outwards.

b)Lift the cover from the container.

2 Dust bag

Fit the opening on the dust bag over the air inlet. Press

the membrane over the flanged edge on the inlet. Secure

with the lock washer. Use only original dust bags.

3 Hose connection

a)Press the hose into the opening until it clicks.

b)Unlock the hose by pressing down on the catch above

the opening.

4 Wand assembly

a) Standard

To connect the wand sections together, simply insert one

section into the other, giving the two assembled sections

a firm push.

b) Telescopic

Adjust the length of the telescopic wand by pressing its

button and altering the wand length. When vacuuming

stairs it is recommended to that the wand is adjusted to

its shortest length.

5 Tools

The accessories shown in the pictures may vary from

model to model.

a) Universal nozzle for both hard floors and carpets

b) Floor nozzle, one way for brush (hard floor)

or smooth for carpet.

c) Crevice Tool designed for cleaning in narrow spaces

like furniture, radiators, corners and joints.

d) Round dusting brush: Useful for dusting furniture,

bookshelfs etc.

e) Combi nozzle/brush, useful tool for the cleaning of

upholstery, stair carpets, curtains etc.

6 Suction control

The suction control in the hose handle lets you regulate

the air-flow to prevent the nozzles from fastening to the

surfaces you are vacuum cleaning.

7 Start / Stop

8 Filter

a) Cartridge filter:

Makes operating without a bag possible. Check the filter

when you empty the container. Change or clean if it is

clogged.

b) Pre-filter:

Avaliable as an accessorie. Easy cleaned or replaceable

pre-filter, to be pulled over the cartridge filter. Fasten by

pulling the two strings and lock with the string lock. Clean

by shaking or washing.

9 Exhaust filter

a)Lift the grill at the back edge.

b)Pull it outwards.

Replace the used filter and snap the grill back in place.

10 Warning

Never attempt to vacuum liquid, glass fragments or

ashes!

Wet surfaces can expose the operator to possible

electrical shock.

IMPORTANT!

The UZ 934 is equipped with a specially designed cable,

which if damaged, must be replaced by a cable of the

same type. These cables are avaible at authorized

service shops and must be installed by trained personnel.

The UZ 934 is equipped with a thermal cut-out to protect

the motor and other vital machine parts from overheating.

Should the machine cut out, you will have to wait at least

5-10 minutes for it to automatically reset. While you are

waiting, switch the machine off and unplug it, then check

the hose, dust bag and filters to be sure that nothing is

blocking the flow of air through the machine.

NB!

Remove the plug from the socket before performing

service or maintenance.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk UZ 934 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info