Bedienungsanleitung Nilfisk UZ 934 (Seite 9 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

73347

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

DOUBLE-INSULATED MACHINES

IMPORTANT

240 volt 50 Hz. machines are fitted with a 13 amp. 3 pin

moulded plug. the plug is fitted with a 13 amp. detachable

fuse. The correct replacement for the fuse is identified by

marking or colour coding. Only fuses that are ASTA

approved to BS 1362 should be fitted. Never use the plug

without the fuse cover fitted. Replacement fuse covers are

available at any electrical retail outlet.

If the available socket outlet is not suitable for the plug

supplied, the plug must be cut off and an appropriate plug

fitted. The plug thus cut off MUST BE DESTROYED for

safety reasons before being disposed of.

Machines built for other voltages and frequencies are not

normally supplied with a fitted plug.

If it is necessary to fit a plug, the wires in this power supply

cord are coloured in accordance with the following code:

BLUE-NEUTRAL

BROWN-LIVE

To connect the new plug:

If using a three-pin plug, do not make any connection to the

the terminal in the plug which is marked with the letter ‘E’ or

by the safety earth symbol or coloured green or green &

yellow. This machine is double-insulated and no earth

connection is necessary.

The wire which is coloured blue must be connected to the

terminal in the plug which is marked with the letter ‘N’ or is

coloured black or blue.

The wire which is coloured brown must be connected to the

terminal in the plug which is marked with the letter ‘L’ or is

coloured red or brown.

If the plug to be fitted does not conform to the above notation

then consult a qualified electrician.

GROUNDED MACHINES

IMPORTANT

240 volt 50 Hz. machines are fitted with a 13 amp. 3 pin

moulded plug. the plug is fitted with a 7 amp. detachable

fuse. The correct replacement for the fuse is identified by

marking or colour coding. Only fuses that are ASTA

approved to BS 1362 should be fitted. Never use the plug

without the fuse cover fitted. Replacement fuse covers are

available at any electrical retail outlet. If the available socket

outlet is not suitable for the plug supplied, the plug must be

cut off and an appropriate plug fitted. The plug thus cut off

MUST BE DESTROYED for safety reasons before being

disposed of. Machines built for other voltages and frequencies

are not normally supplied with a fitted plug. If it is necessary

to fit a plug, the wires in this power supply cord are coloured

in accordance with the following code:

GREEN & YELLOW-EARTH

BLUE-NEUTRAL

BROWN-LIVE

To connect the new plug:

The wire which is coloured green & yellow must be connected

to the terminal in the plug which is marked with the letter 'E'

or by the safety earth symbol

or coloured green or

green & yellow. The wire which

is coloured blue must be connected to the terminal in the

plug which is marked with the letter 'N' or is coloured black

or blue. The wire which is coloured brown must be connected

to the terminal in the plug which is marked with the letter 'L'

or is coloured red or brown. If the plug to be fitted does not

conform to the above notation then consult a qualified

electrician.

ELECTRICAL CONNECTIONS

(Only applicable to UK)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nilfisk UZ 934 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info