Bedienungsanleitung Ninja BL682EU2 (Seite 23 von 93) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

716485

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

44 45

ENGLISH

www.ninjakitchen.eu

Before First Use

Assembly and Use for the Ninja

Blender

Fig. 2

Fig. 4a Fig. 4b

Fig. 1

Fig. 3

Fig. 5a

Fig. 5b

PLEASE KEEP THESE IMPORTANT

SAFEGUARDS IN MIND WHEN USING THE

APPLIANCE:

IMPORTANT: Make sure that the motor base is

plugged in for use.

IMPORTANT: Never add ingredients into the

container before placing the attachment in ﬁrst.

IMPORTANT: Attachments are not

interchangeable.

IMPORTANT: DO NOT attempt to operate the

appliance without the lid on.

IMPORTANT: Never run the appliance empty.

IMPORTANT: Appliance accessories are not

intended to be used in the microwave as it may

result in damage to the accessories.

WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.

WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or

to shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the

user being burned.

IMPORTANT: Make sure that the motor base is plugged in for use.

1 Review warning and caution statements above before

proceeding to number 2.

2 Place the motor base on a clean, dry, level surface such

as a counter or tabletop.

3 Holding the Stacked Blade Assembly by the top of the

shaft, place it onto the drive gear inside the pitcher.

Ensure that the Stacked Blade Assembly is seated

properly and is standing upright. (Fig. 1)

NOTE: The Stacked Blade Assembly will ﬁt loosely on

the drive gear.

4 Place the motor base on a clean, dry, level surface such

as a counter or tabletop.

5 Align and lower the pitcher onto the motor base.

(Fig. 2) Handle should be aligned slightly to the right of

the “LOCK” symbol on the motor base.

6 Rotate the pitcher clockwise until it locks in place, you

will hear a click when the lock is engaged. (Fig. 3)

7 The pitcher can be placed on the motor base two ways;

the handle can be on the front right corner or the front

left corner. (Fig. 4a, Fig. 4b)

8 Add the ingredients to the pitcher, making sure that

they do not exceed the highest measured marking line

on the side of the pitcher.

NOTE: When blending any kind of liquids, such as

mixtures of any drinks or smoothies, do not exceed the

“MAX LIQUID” mark (2 L) on the pitcher.

NOTE: If you need to add additional ingredients while

the appliance is processing, open the pour spout cap

and pour the ingredients in through the opening.

9 Holding the lid by the handle in the upright position, place

it on top of the pitcher aligning the triangle ( ) located on

the lid with the triangle ( ) located on the pitcher’s handle.

(Fig. 5a) Press the handle down until you hear a click.

The triangles on the lid and the blender handle MUST be

aligned in order for the blender to turn on. (Fig. 5b)

10 Plug the power cord into the electrical outlet and press

the power button ( ).

IMPORTANT: As a safety feature, the power light

( ) will ﬂash and the motor will not work if the

pitcher and lid are not installed correctly. When

the pitcher and lid are installed properly, the

power light ( ) will be solid, indicating that the

appliance is ready for use.

ASSEMBLY

HIGH

PULSE

LOW

DOUGH

SMOOTHIE

SINGLE

SERVE

PUREE

FROZEN

BLENDING

MED

LOW /

DOUGH

HIGH

PULSE

LOW

DOUGH

SMOOTHIE

SINGLE

SERVE

PUREE

FROZEN

BLENDING

MED

LOW /

DOUGH

HIGH

PULSE

LOW

DOUGH

SMOOTHIE

SINGLE

SERVE

PUREE

FROZEN

BLENDING

MED

LOW /

DOUGH

WARNING: Stacked

Blade Assembly is

sharp and not locked in

place. If using the pour

spout, ensure the lid

is fully locked onto the

pitcher. Failure to do so

will result in a risk of

laceration.

WARNING: Stacked

Blade Assembly is sharp

and not locked in place.

If pouring with the lid

removed, carefully

remove the Stacked Blade

Assembly ﬁrst, holding it

by the shaft. Failure to do

so will result in a risk of laceration.

CAUTION: Do not immerse the motor base into

water or any other liquid.

1 Remove all packaging material and labels from the

appliance.

Separate/remove all parts from each other.

2 Wash the lids, containers, discs and blade assemblies

in warm, soapy water. When washing the blade

assemblies, use a dish-washing utensil with a handle to

avoid direct hand contact with blades.

WARNING: Handle the blade assemblies and

discs with care when washing, as the blades are

sharp.

3 Handle blade assemblies with care to avoid contact

with sharp edges. Rinse and air dry thoroughly.

4 The lids, containers, discs and blade assemblies are all

dishwasher safe. It is recommended that the lids, blade

assemblies and discs be placed on the top rack. Ensure

the blade assemblies and discs are removed from the

containers before placing in the dishwasher.

5 Wipe the motor base clean with a damp cloth.

WARNING: Chopping

Blade Assembly is sharp and

not locked in place. Before

emptying contents carefully

remove lid and Chopping

Blade Assembly or Mini Prep

Bowl Blade Assembly, holding it by the

shaft. Failure to do will result in risk of

laceration.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ninja BL682EU2 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info