Bedienungsanleitung Ninja BL682EU2 (Seite 25 von 93) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

716485

Zoom out

Zoom in

Vorherige Seite

1/93

Nächste Seite

48 49

ENGLISH

www.ninjakitchen.eu

Assembly and Use for the Ninja

Processor Bowl - cont.

REMOVAL

USEUSE

Fig. 2 Fig. 3 Fig. 5Fig. 1

USING THE CHOPPING BLADE ASSEMBLY

1 Review warning and caution statements at the top of page 47

before proceeding to number 2.

2 Holding the Chopping Blade Assembly assembly by the shaft,

place it onto the gear shaft inside the bowl. Ensure that the

Chopping Blade Assembly ﬁts around the gear shaft and that

it is standing straight.

3 Add the ingredients and secure the bowl lid onto the bowl.

(Fig. 1)

4 Plug the power cord into the electrical outlet and press on the

power button ( ).

5 Select the speed or Auto-iQ

program that best suits your

needs. Pulse ingredients for even chopping by holding

the Auto-iQ PULSE button until your desired consistency is

reached.

NOTE: Max PULSE iteration is 30 pulses. After 30 pulses

allow 10 minutes to pass before running the PULSE function

up to an additional 30 pulses.

NOTE: Please refer to “Speed Settings & Uses” chart for

suggested uses and speeds.

6 When you have reached your desired consistency, stop the

appliance by pressing the power button ( ) and wait for the

blade to stop turning. (Fig. 2)

7 To remove the lid, press the release button on the lid and turn

it anticlockwise. (Fig. 2)

8 Turn the bowl anticlockwise and lift it to remove it from the

motor base. (Fig. 3)

9 To release the motor base from the counter or tabletop, place

your hands underneath both sides of the motor base and

gently pull the unit up and towards you. (Fig. 4)

USING THE DOUGH BLADE ASSEMBLY

1 Review warning and caution statements at the top of page 47

before proceeding to number 2.

2 Holding the Dough Blade Assembly by the shaft, place it onto

the gear shaft inside the bowl. Ensure that the Dough Blade

Assembly ﬁts around the gear shaft and that it is standing

straight. (Fig. 5)

3 Add the ingredients and secure the bowl lid onto the bowl.

4 Plug the power cord into the electrical outlet and press on

the power button (

). Select the LOW/DOUGH button and

process until ingredients come together to form a mass.

NOTE: Please refer to “Speed Settings & Uses” chart for

suggested uses and speeds.

5 Once ﬁnished making dough, stop the appliance by pressing

the power button (

) and wait for the blade to stop turning.

6 To remove the lid, press the release button on the lid and and

turn it anticlockwise. (Fig. 2)

7 Turn the bowl anticlockwise and lift it to remove it from the

motor base. (Fig. 3)

8 To release the motor base from the counter or tabletop, place

your hands underneath both sides of the motor base and

gently pull the unit up and towards you. (Fig. 4)

Fig. 1

USING THE DISCS

NOTE: Cutting Discs must be used with the feed

chute lid.

1 Review warning statements above before proceeding to

number 2.

2 Place the motor base on a clean, dry, level surface

such as a counter or tabletop. Press down on the motor

base to make sure that the suction cups adhere to the

counter or tabletop. (Fig. 1)

3 Secure the bowl onto the motor base.

4 Place the spindle inside the bowl.

5 Use the ﬁnger holes to grasp the selected disc and

place it over the spindle.

6 Place the feed chute lid on the bowl and turn clockwise

until you hear a click indicating the lid is locked in

place. (Fig. 1)

7 Plug the power cord into the electrical outlet and press

up on the power toggle (

) to turn the power “On”.

8 Select LOW/DOUGH on the control panel. The discs will

begin spinning.

9 Add the food that you want to slice, shred or grate

through the feed chute on the lid. (Fig. 1) Use the

two-part food pusher to help guide the food through

the feed chute. The middle piece of the food pusher is

removable to use for smaller ingredients.

10 When ﬁnished,stop the appliance by pressing the

power button (

) and wait for the disc to stop turning.

Press the button on the feed chute lid located near the

handle to unlock and turn the lid anticlockwise. Lift to

remove from the processor bowl. Using the ﬁnger holes,

carefully lift the disc out of the bowl and remove the

spindle.

11 To release the motor base from the counter or tabletop,

place your hands underneath both sides of the motor

base and gently pull the unit up and towards you.

Fig. 4

Assembly and Use for the Cutting Discs

WARNING: The Cutting Discs are sharp. Always use the ﬁnger holes when placing or removing the cutting

discs. Failure to do so will result in a risk of laceration.

WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to

shatter, which may cause personal injury.

WARNING: Never leave the appliance unattended while in use.

IMPORTANT: Make sure that the motor base is plugged in for use.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ninja BL682EU2 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info