➔ Symbol lights up and Sym-
bol con tinues to flash.
➔ Remove the drip tray and used
coffee tray (fig. 1/L and 1/U) and
clean thoroughly.
➔ Replace the drip tray and used
coffee tray.
➔ Symbol and the 1-cup but-
ton flash.
➔ First remove and fill the water
reservoir with fresh water up to
the 0.5 l mark. Replace the water
reservoir in the machine.
➔ Then add the descaling agent
to the water (never the other way
round – please note the manu -
facturer’s instructions).
➔ Now press the flashing 1-cup
button.
➔ The machine starts the des -
caling program (water flows in).
➔ The first stage of the descaling
program lasts about 12 minutes.
➔ Symbol flashes.
➔ Now place a fairly large container
(about 0.5 l) under the steam / hot
water jet.
➔ Turn the steam / hot water valve
control knob right to open.
➔ The second stage of the des -
caling program starts and runs for
about 10 minutes.
➔ As soon as the cycle is com -
pleted, Symbol lights up.
➔ Remove, empty and replace the
drip tray.
➔ Symbol and the 1-cup but-
ton both flash.
➔ Remove and clean the water
reservoir and fill it up with fresh
water.
➔ Replace the water reservoir.
➔ Now place a fairly large container
(about 0.5 l) under the steam / hot
water jet.
➔ Press the flashing 1-cup button.
➔ The rinsing operation via the hot
water jet begins.
➔ When the rinsing operation is
completed, Symbol flashes.
➔ Turn the hot water / steam knob
to the left to close.
➔ The internal rinsing operation
begins and lasts about 1 minute.
➔ Symbol lights up.
➔ Remove and empty the drip and
used coffee trays.
➔ Clean them and replace them
in the machine.
➔ The machine warms up briefly
and is operational again when the
bean symbol in the display and all
operating buttons light up without
flashing.
... 5. Maintenance and care
54
