Bedienungsanleitung Nokia 4300D (Seite 24 von 46) (Englisch)

774479

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

setup process.

• Channel Skip: Select the channels to be skipped when switching channels using the Programme +/- buttons

on the remote control. Highlight the desired channels in the list and press OK to select them.

• Channel Swap: Swap the position of two selected channels in the channel list. Highlight the desired channel

in the list and press OK. Select the second desired channel and swap the position of these two channels. You

should set the LCN option to O or Default to enable this feature.

• Channel Move: Move a channel to the position of another one. Highlight the channel you want to move and

press OK. Highlight the second channel and it will be moved to the position of the rst channel. You should

set the LCN option to O or Default to enable this feature.

• Channel Edit: Edit channels in the channel list. Edit the name and the channel number of the

selected channel and display information about Network Name, Frequency, Colour System, Sound System,

Modulation and Symbol Rate. Depending on the channel other options may also be editable. You can press

the Blue button to delete the highlighted channel.

• Analogue Channel Fine-tune: Fine-tune an analogue channel. A list of available

analogue channels will be displayed. Select the desired channel from the list and press OK. Then change the

frequency of the channel by pressing Left/Right directional buttons. Press OK to store the new frequency

for that channel. Press Back to cancel. This item may not be visible, depending on whether the last watched

channel was analogue or not.

• Clear Channel List: Delete all channels stored in the channel list of the selected channel installation

mode. A dialogue will be displayed for conrmation. Highlight OK and press OK to proceed. Highlight Cancel

and press OK to cancel the deletion process.

Note: Some options may not be available and appear as grayed out depending on the operator selection and

operator related settings.

10.2.3. Channel installation Mode-Preferred Satellite

• Satellite Re-scan: The satellite search process will be performed again.

• Satellite Add: This function is useful when the General Satellite option is selected as the TV signal type.

When the Preferred Satellite option is selected, DiSEqC settings will be automatically determined and

channels from new satellite providers will be added from new selected satellites, depending on the selected

satellite provider.

• Satellite Update: If you select the Scan function, the receivable satellites and the corresponding DiSEqC

settings will be determined automatically and the new channels will be added.

• Satellite Manual Tuning: Select the satellite on which you want to perform the manual search of the

satellite transponder and press OK. Set the exact reception parameters of the desired satellite transponder

(frequency, symbol rate and polarization). Make sure that the signal quality and signal level indicate a

sucient value and press the Back button. Press the Right directional button to start the search. The

found programs will be saved at the end of the program list.

• Channel Skip: Select the channels to be skipped when switching channels using the Programme +/- buttons

on the remote control. Highlight the desired channels in the list and press OK to select them.

• Channel Swap: Swap the position of two selected channels in the channel list. Highlight the desired channel

in the list and press OK. Select the second desired channel and swap the position of these two channels. You

should set the LCN option to O or Default to enable this feature.

• Channel Move: This function is partially available in the “Preferred Satellite” satellite installation mode. The

channel list of the selected providers cannot be edited.

• Channel Edit: Edit channels in the channel list. Edit the name and the channel number of the selected

channel and display information about Network Name, Frequency, Colour System, Sound System,

Modulation and Symbol Rate. Depending on the channel other options may also be editable. You can press

the Blue button to delete the highlighted channel.

• Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode.

A dialogue will be displayed for conrmation. Highlight OK and press OK to proceed. Highlight Cancel and

press OK to cancel the deletion process.

10.2.4. Channel installation Mode-General Satellite

• Satellite Re-scan: The satellite search process will be performed again. As an option, you can activate

another receivable satellite and add it to the automatic search. Select another satellite and press OK.

Set the exact reception parameters of the desired satellite, the DiSEqC connections and the reception

parameters of a receivable satellite transponder (the frequency, the symbol rate and the polarization). Make

sure that the signal quality and signal level indicate a sucient value and press the Back button. Press the

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 4300D Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 4300D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info