Bedienungsanleitung Nokia 4300D (Seite 25 von 46) (Englisch)

774479

Zoom out

Zoom in

Vorherige Seite

1/46

Nächste Seite

Right directional button to start the scan. The found programs will be saved at the end of the program list.

• Satellite Add: Press OK to set the reception parameters of the satellite you want to add. Activate the

satellite in the satellite status and set the exact reception parameters of the desired satellite. Set the

DiSEqC ports and the reception parameters of a receivable satellite transponder (the frequency, the symbol

rate and the polarization). Make sure that the signal quality and signal level indicate a sucient value and

press the Back button. Press the Right directional button to start the scan. The found channels will be

stored at the end of the channel list.

• Satellite Update: The channel scan of the selected satellites will be started and new channels will be added

to the channel list automatically.

• Satellite Manual Tuning: Select the satellite on which you want to perform the manual search of the

satellite transponder and press OK. Set the exact reception parameters of the desired satellite transponder

(frequency, symbol rate and polarization). Make sure that the signal quality and signal level indicate a

sucient value and press the Back button. Press the Right directional button to start the search. The found

programs will be saved at the end of the program list.

• Channel Skip: Select the channels to be skipped when switching channels using the Programme +/- buttons

on the remote control. Highlight the desired channels in the list and press OK to select them.

• Channel Swap: Swap the position of two selected channels in the channel list. Highlight the desired channel

in the list and press OK. Select the second desired channel and swap the position of these two channels. You

should set the LCN option to O or Default to enable this feature.

• Channel Move: Move a channel to the position of another channel. Highlight the channel you want to move,

press OK to select it and choose a new position using the number keys.

• Channel Edit: : Edit channels in the channel list. Edit the name and the channel number of the selected

channel and display information about Network Name, Frequency, Colour System, Sound System,

Modulation and Symbol Rate. Depending on the channel other options may also be editable. You can press

the Blue button to delete the highlighted channel.

• Clear Channel List: Delete all channels stored in the channel list of the selected channel installation mode.

A dialogue will be displayed for conrmation. Highlight OK and press OK to proceed. Highlight Cancel and

press OK to cancel the deletion process.

10.2.5. Auto channel update

Turn the auto channel update function on or o.

10.2.6. Channel update message

Turn the channel update message function on or o. This item may not be visible, depending on the Channel

Installation Mode selection.

10.2.7. Parental controls

To enter this menu PIN should be entered rst. Default PIN is set to 1234. If you have dened a new PIN after the

initial setup process use the PIN that you have dened. Some options may not be available or vary depending

on the country selection during the initial setup.

• Channels Blocked: Select channel/s to be blocked from the channel list. Highlight a channel and press OK to

select/unselect. To watch a blocked channel PIN should be entered rst.

• Programme Restrictions: Block programmes according to the age rating information that is being

broad- casted with them. You can turn on or o restrictions, set rating systems, restriction levels and age

limits using the options of this menu.

• Inputs Blocked: Prevent access to the selected input source content. Highlight the desired input option and

press OK to select/unselect. To switch to a blocked input source PIN should be entered rst.

• Change PIN: Change the default PIN. Highlight this option and press OK. You will need to enter the old PIN

rst. Then new PIN entry screen will be displayed. Enter the new PIN twice for conrmation.

10.2.8. Audio channel

Set the audio channel preference, if available. This item may not be visible, depending on whether or not the

last watched channel was analogue.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 4300D Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 4300D

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info