Bedienungsanleitung Nokia 9000i (Seite 79 von 126) (Englisch)

297910

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

Chapter 10 - System 10-3

Pressing Close will close the security settings

view and return to the Security main view.

The security settings list is as follows:

PIN code request — On / Off (default)

If you set the PIN (Personal Identity Number)

code request on, the system requests the code

every time when the phone interface is turned

on by pressing . You can also turn the PIN

code request on or off in the phone interface

Security options menu (Menu 5 1). This set-

ting cannot be changed if the phone interface

is switched off.

Note: Some SIM cards do not allow you to turn

the PIN code request off.

If you enter the PIN code incorrectly three

times in a row, you will need a PUK code to

unblock the SIM card. When the SIM card is

blocked, you cannot make or receive any calls

(including faxes, short messages, mail, etc.),

except emergency calls. Otherwise, the com-

municator can be used normally.

Autolock period — Autolock off (default) / 1 / 2 / 5

/ 10 / 15 minutes

This setting determines the security time-out

period, after which the system will lock. The

timer is reset by any input, calls or data trans-

fer/printing activity.

SIM change security — On (default) / Off

When active, this security option checks

whether the SIM card in the communicator

has been changed. The check is made every

time the phone interface is switched on. The

SIM change security option can also be acti-

vated in the phone interface Security options

menu (Menu 5 2).

If the SIM card has been changed and the

new SIM card has not previously been used

with your communicator, the communicator

locks itself until the lock code, supplied with

the phone, is correctly entered. The communi-

cator recognises five different SIM cards as

the owner’s cards.

PIN code

When the phone interface is switched on, this

setting allows you to change the PIN code.

The changing procedure is as described at the

beginning of this "Security" section. The new

PIN code must be 4 to 8 digits long. The PIN

code can also be changed in the phone inter-

face Security options menu (Menu 5 6 2).

The PIN code is supplied with the SIM card.

When the PIN code request is enabled, the

code is required each time the phone inter-

face is switched on. The PIN code request

must be turned on to change the code.

If you enter a wrong PIN code three times in

succession, the PIN code is disabled and can-

not be used any more. At the prompt, key in

the PUK code (see below) and follow the in-

structions on the display.

Lock code

This setting allows you to change the lock

code. The changing procedure is as described

at the beginning of this "Security" section.

The new code must be 5 digits long. The lock

code can also be changed in the phone inter-

Figure 10-2

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 9000i Seite 79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 9000i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info