Bedienungsanleitung Nokia 9000i (Seite 81 von 126) (Englisch)

297910

Zoom out

Zoom in

Vorherige Seite

1/126

Nächste Seite

Chapter 10 - System 10-5

Connecting to a PC

To use the System applications that allow you to

connect to a PC (File transfer, Install/Remove

software, Backup/Restore, Import/Export con-

tacts, Import/Export calendar data), you must

first install the Nokia Communicator Server pro-

gramme (provided on a diskette in the sales

package) on the PC and then launch it. The Nokia

Communicator Server software requires Micro-

soft Windows 3.1 (or later) or Windows NT 3.51

(or later) and a free serial or infrared (IrDA com-

patible) port to run. See the readme.txt file on

the diskette supplied in the communicator sales

package.

To install the connectivity software on the PC:

1 Insert the diskette in your diskette drive.

2 In the Program Manager of your Windows,

click on the “File” menu.

3 Click on menu item “Run” and type a:\server

in the command line.

4 Press Enter.

5 Follow the instructions shown on the screen.

To establish an infrared serial connection:

1 The IrDA software must be installed and run-

ning on your PC in order to establish an infra-

red connection. If you have Windows 95, you

will need to download the IrDA driver soft-

ware from the Internet site of Microsoft. The

default IrDA port for the software is COM4;

however, the physical port may be COM1 or

COM2.

2 Make sure that the communicator’s infrared

port faces the infrared port of the PC (or

printer). Keep the infrared link clear – check

the infrared indicators in the indicator area,

see chapter 2 "Getting started: Indicators" on

page 2-9. In the event the infrared link is ob-

structed for too long (for example, something

is moved between the infrared sensors or the

communicator is moved), the operation is in-

terrupted.

3 Start the connectivity software on the PC.

Check that the COM port reported by the con-

nectivity software is correct.

Note: When using the communicator as a fax

modem, use the infrared connection (see

”Fax modem” on page 10-6).

To establish a serial cable connection:

1 Connect the adapter to the communicator (for

instructions on how to do this, see chapter 2

"Getting started: Connectors" on page 2-4).

2 Connect the 9-pin adapter end of the RS-232

cable to the COM port of the PC and the other

end to the adapter (into the connector on the

left side of the adapter).

3 Start the connectivity software on the PC.

Check that the COM port reported by the con-

nectivity software is correct.

After you have established a connection to a PC

and the connectivity software is running on the

PC, you can start the communicator’s connectiv-

ity applications. When the PC connection is ac-

tive, the call status indicator shows the text PC-

CONN. If the connection to the PC cannot be cre-

ated, check the settings of the connectivity ap-

plication. You must define the COM port and the

PC drive or path correctly.

Note: Making or answering to phone calls during

a PC connection is not recommended as it

might disrupt the operation.

Remember to make backup copies of all impor-

tant data!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nokia 9000i Seite 81

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Nokia 9000i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info