Bedienungsanleitung NordicTrack E8.2 (Seite 19 von 36) (Englisch)

708088

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

HOW TO USE THE MANUAL MODE

1. Begin pedaling or press any button on the

console to turn on the console.

See HOW TO TURN ON THE POWER on

page 18.

2. Select the manual mode.

Press the Manual Control button on the console to

select the manual mode.

If a wireless iFit module is not inserted into the con-

sole and connected to iFit, the manual mode will be

selected automatically.

3. Change the resistance of the pedals and the

incline of the ramp as desired.

As you pedal, change the resistance of the pedals

by pressing the Resistance increase and decrease

buttons.

Note: After you press a button, it will take a

moment for the pedals to reach the selected

resistance level.

To vary the motion of the pedals, you can change

the incline of the ramp. To change the incline,

press one of the numbered 1 Step Ramp buttons

or press the 1 Step Ramp increase and decrease

buttons.

Note: After you press a button, it will take a

moment for the ramp to reach the selected incline

level.

4. Follow your progress with the display.

The display can show the following workout

information:

Calories (Cals.)—This display mode will show the

approximate number of calories you have burned.

Calories per Hour (Cals./Hr)—This display mode

will show the approximate number of calories you

are burning per hour.

Distance (Dist.)—This display mode will show

the distance that you have pedaled in miles or

kilometers.

Incline—This display mode will show the incline

level of the ramp for a few seconds each time the

incline level changes.

Pulse—This display mode will show your heart rate

when you use the handgrip heart rate monitor or an

optional chest heart rate monitor (see step 5).

Resistance (Resist.)—This display mode will

show the resistance level of the pedals for a few

seconds each time the resistance level changes.

RPM—This display mode will show your pedaling

speed in revolutions per minute (rpm).

Stride—This display mode will show the total num-

ber of strides you have pedaled.

Time—When the manual mode is selected, this

display mode will show the elapsed time. When an

onboard workout is selected, this display mode will

show the time remaining in the workout.

The matrix offers several display tabs. Press the

Display button until the desired tab is shown. You

can also press the increase and decrease buttons

next to the Enter button.

Speed—This tab will show a profile of the speed

settings of the workout. A new segment will appear

at the end of each minute.

My Trail—This tab will show a track that represents

1/4 mile (400 m). As you exercise, the flashing

rectangle will show your progress. The My Trail tab

will also show the number of laps you complete.

Calorie—This tab will show the approximate

amount of calories you have burned. The height of

each segment represents the amount of calories

burned during that segment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NordicTrack E8.2 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NordicTrack E8.2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info