Bedienungsanleitung NordicTrack E8.2 (Seite 25 von 36) (Englisch)

708088

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

HOW TO CHANGE CONSOLE SETTINGS

The console features a user mode that allows you to

view usage information, select a unit of measurement,

and adjust the contrast level of the display.

When an iFit module is connected to the console,

you can also use the information mode to choose an

audio setting for the voice of the personal trainer, set a

default menu, check the status of the iFit module, and

check for downloads.

1. Select the information mode.

To select the information mode, press and hold

down the Display button for a few seconds until the

information mode appears in the display.

2. View usage information.

The display will show the total number of hours that

the elliptical has been used. The display will also

show the total distance (in miles or kilometers) that

has been pedaled on the elliptical.

3. Select a unit of measurement if desired.

The word ENGLISH for English miles or the word

METRIC for metric kilometers will appear in the

display to indicate the currently selected unit of

measurement.

To change the unit of measurement, press the

Enter button repeatedly to select the desired unit of

measurement.

4. Adjust the contrast level of the display if

desired.

Press the decrease button to view the contrast

level. The currently selected contrast level will

appear in the display. Press the 1 Step Ramp

increase and decrease buttons to adjust the con-

trast level.

5. Determine if an iFit module is connected to the

console.

If an iFit module is connected to the console, the

display will show the words WIFI MODULE or USB

MODULE.

If no module is connected, the display will show

the words NO IFIT MODULE. If no module is con-

nected, go to step 10.

6. Select an audio setting for the voice of the

personal trainer if desired.

Press the decrease button to view the audio setting

for the voice of the personal trainer. The currently

selected audio setting for the voice of the personal

trainer will appear in the display.

To change the audio setting, press the Enter button

repeatedly to turn the voice of the personal trainer

ON or OFF.

7. Set the default menu if desired.

Press the decrease button to view the default menu

setting. The default menu is the menu that will

appear when you turn on the console. Press the

Enter button repeatedly to select the manual mode

menu or the iFit menu as the default menu.

8. Check the status of the iFit module if desired.

Press the decrease button to view the iFit sta-

tus display. The words CHECK WIFI STATUS or

CHECK USB STATUS will appear in the display.

Then, press the Enter button. After a few seconds,

the status of the iFit module will appear in the dis-

play. To exit this display, press and hold down the

Display button for a few seconds.

9. Check for downloads if desired.

Press the decrease button to view the downloads

display. The words SEND/RECEIVE DATA will

appear in the display.

Then, press the Enter button. The console will then

check for iFit workouts and firmware downloads.

10. Exit the information mode.

Press the Display button to exit the information

mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NordicTrack E8.2 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NordicTrack E8.2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info