Bedienungsanleitung NordicTrack U60 - NTEVEX78915.0 - 368926 (Seite 17 von 28) (Englisch)

669913

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

HOW TO USE AN ONBOARD WORKOUT

1. Begin pedaling or press any button on the

console to turn on the console.

When you turn on the console, the display will turn

on. The console will then be ready for use.

2. Select an onboard workout.

To select an onboard workout, press the Calorie

Workouts button or the Performance Workouts but-

ton repeatedly until the desired workout appears in

the display.

When you select an onboard workout, the display

will show the duration of the workout and the name

of the workout. A profile of the speed settings of the

workout will appear in the matrix.

The maximum resistance level and the maximum

speed for the workout will also appear in the

display.

3. Begin pedaling to start the workout.

Each workout is divided into one-minute seg-

ments. One resistance level and one target speed

is programmed for each segment. Note: The same

resistance level and/or target speed may be pro-

grammed for consecutive segments.

During

the work-

out, the

profile on

the speed

tab will

show your

progress.

The flash-

ing segment of the profile represents the current

segment of the workout. The height of the flashing

segment indicates the target speed for the current

segment.

At the end of each segment of the workout, a

series of tones will sound and the next segment of

the profile will begin to flash. If a different resis-

tance level and/or target speed is programmed for

the next segment, the resistance level and/or target

speed will appear in the display for a few seconds

to alert you. The resistance of the pedals will then

change.

As you exercise, you will be prompted to keep your

pedaling speed near the target speed for the cur-

rent segment. When an upward-pointing arrow

appears in the display, increase your pedal-

ing speed. When a downward-pointing arrow

appears, decrease your pedaling speed. When

no arrow appears, maintain your current pedaling

speed.

IMPORTANT: The target speed is intended only

to provide motivation. Your actual pedaling

speed may be slower than the target speed.

Make sure to pedal at a speed that is comfort-

able for you.

If the resistance level for the current segment is

too high or too low, you can manually override

the setting by pressing the Resistance buttons.

IMPORTANT: When the current segment of the

workout ends, the pedals will automatically

adjust to the resistance level programmed for

the next segment.

The workout will continue in this way until the last

segment ends. To stop the workout at any time,

stop pedaling. The time will flash in the display. To

resume the workout, simply resume pedaling.

4. Follow your progress with the display.

See step 4 on page 14.

5. Measure your heart rate if desired.

See step 5 on page 15.

6. Turn on the fan if desired.

See step 6 on page 16.

7. When you are finished exercising, the console

will turn off automatically.

See step 7 on page 16.

Profile

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NordicTrack U60 - NTEVEX78915.0 - 368926 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NordicTrack U60 - NTEVEX78915.0 - 368926

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info