17
EN
Set the temperature using the temperature •
control dial (4). The temperature must be
between medium temperature ("MED")
and maximum temperature ("MAX"). The
temperature display (6) shows the selected
temperature.
The temperature indicator (5) and "steam •
ready" indicator (9) flash as the appliance
heats the water. When the temperature
indicator (5) and "steam ready" indicator
(9) come on, the appliance is ready for use.
The temperature indicator (5) and "steam •
ready" indicator (9) will illuminate and
extinguish as the appliance switches on and
off to maintain the required temperature.
Note: A buzzer will sound when the pump
inside the steam generator operates.
The "pump active" indicator (10) remains on
during the process.
To use the steam shot function:•
- Set the steam volume using the steam
volume button (7).
- To supply a shot of steam during use,
press the steam shot button (13).
For continuous steam, keep the steam
shot button (13) pressed.
- Press the steam shot button (13) at
intervals to iron vertically (curtains, hung
garments, etc.).
- The steam generator can be set to
produce steam without keeping the
steam shot button (13) pressed: Move
the steam lock button (14) forward to
start emitting steam from the soleplate
(17) continuously. Move the steam lock
button (14) backward to stop emitting
steam from the soleplate (17)
continuously.
Before you proceed, we would like you to
focus your attention on the following notes:
- Always release the steam lock button (14)
when you place the iron (1) onto the iron
holder (18).
If you interrupt the process, place the iron •
(1) onto the iron holder (18).
After use, place the iron (1) onto the iron •
holder (18).
Press the on/off button (3) to switch off the •
appliance. The on/off indicator (3) flashes.
Remove the mains plug from the wall •
socket. The on/off indicator (3) goes off.
Allow the appliance to cool down •
completely.
Ironing tips
Start ironing fabrics that require lower •
temperatures (e.g. synthetics). Finish by
ironing fabrics that respond best to higher
temperatures and steam (e.g. cotton and
linen).
It is recommended to use low •
temperatures for fabrics that have unusual
finishes (sequins, embroidery, etc.).
If the fabric is mixed (e.g. 40% cotton, 60% •
synthetic), choose the temperature for the
fabric requiring the lowest temperature.
If you do not know the composition of the •
fabric, determine the temperature by
testing on a hidden corner of the fabric.
Start ironing with a low temperature and
gradually increase the temperature.
It is recommended to iron silk, woolen or •
synthetic fabrics inside out.
It is recommended to iron velvet fabrics in •
the direction of the fibre without exerting
pressure on the appliance.
If the fabric is not completely dry, the •
ironing process will become smoother.
Always iron silk fabrics when they are damp.
Do not iron areas with traces of perspiration •
or other marks in order to prevent staining.
If you use starch, spray the starch onto the •
other side of the fabric and clean the
soleplate more frequently.
Automatic switch-off function
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not rely on the automatic switch-off
function to switch off the appliance.
After use, switch off the appliance using
the on/off button (3) and remove the
mains plug from the wall socket.
The steam generator (2) will switch off
automatically if you leave the iron (1) resting
on the soleplate (17) for more than 30 seconds
or on its back for more than 15 minutes.
