Bedienungsanleitung Nova 330300 (Seite 11 von 32) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

46040

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Cyclone Cleaner 2000 Article 330300

Maintenance

and cleaning

• Clean the appliance thoroughly after

use.

• Make sure the plug has been removed

from the plug socket before cleaning

the appliance.

• Make sure no moisture comes into

contact with the appliance’s electrical

parts.

• Never immerse the appliance, the

power cord or the plug in water or

other liquids.

• Never use aggressive or scouring

cleaning products or sharp objects

(such as a knife or a hard brush) to

clean the appliance.

Cleaning the appliance

1 Remove the plug from the plug socket.

2 Clean the exterior of all the components

with a damp cloth. Only use cleaning

products that are suitable for plastic.

3 Dry the appliance and the accessories

thoroughly before storing them.

4 Over the course of time, dust and dirt

can accumulate around the wheel

axles, thereby preventing the wheels

from turning easily. They should,

therefore, be kept clean.

Emptying the dust collector

See figure 8.

The “Dust collector full" indicator indicates

when the dust collector must be emptied.

1 Remove the plug from the plug socket.

2 Remove the dust collector by lifting the

dust collector’s handle and taking out

the dust collector.

3 Hold the dust collector above a rubbish

bin and press the dust collector base

unlocking button.

4 Make sure the dust collector is

completely empty. If necessary, shake

the dust collector to remove all the

waste.

5 Close the base of the dust collector by

clicking it into place.

6 Place the dust collector back into the

appliance. Push the handle of the dust

collector’s cover down as far as

possible. This will lock the dust collector

in the appliance.

Replacing the HEPA filter

See figure 9.

Regularly check whether the HEPA filter is

blocked. If this is the case, clean the filter

or replace it with a new filter.

1 Remove the plug from the plug socket.

2 Remove the dust collector by lifting the

dust collector’s handle and taking out

the dust collector.

3 Remove the waste from the dust

collector as described in ‘Emptying the

dust collector’.

4 Remove the cover from the dust

collector (see figure 9A). Hold the cover

in one hand and use your other hand to

unscrew the dust collector by rotating it

clockwise. The arrow on the cover will

now be aligned with the arrow with the

picture on the dust collector. Remove

the cover from the dust collector.

5 Remove the filter tube and the filter

from the dust collector’s cover (see

figure 9B). Hold the cover in one hand

and the end of the filter in your other

hand. Unscrew the filter tube and the

filter by rotating it anticlockwise. The

arrow on the bottom of the cover will

now be aligned with the arrow with the

picture on the filter tube. Remove the

cover from the filter tube.

6 Remove the filter tube from the dust

filter (see figure 9C). Hold the filter tube

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Nova 330300 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info